Standalone Linear NiMH/NiCd Fast Battery Charger Features: Complete Fast Charger Controller for Single, 2-, 3- or 4-Series Cell NiMH/NiCd Batteries No Firmware or Microcontroller Required Termination by –V, Maximum Voltage or Maximum Time No Sense Resistor or Blocking Diode Required Automatic Recharge Keeps Batteries Charged Programmable Fast Charge Current: 0.4A to 2A Accurate Charge Current: ±5% at 2A Fast Charge Current Programmable Beyond 2A with External Sense Resistor Automatic Detection of Battery Precharge for Heavily Discharged Batteries Optional Temperature Qualified Charging Charge and AC Present Status Outputs Can Drive LED Automatic Sleep Mode with Input Supply Removal Negligible Battery Drain in Sleep Mode: <1µA Manual Shutdown Input Supply Range: 4.5V to 10V Available in 16-Lead DFN and TSSOP Packages

Standalone Linear Li-Ion Battery Charger with Thermistor Input Features: Charge Current Programmable up to 1A Charges Single Cell Li-Ion Batteries Directly from USB Port Preset 4.375V Float Voltage with ±0.4% Accuracy Thermistor Input for Temperature Qualified Charging Input Supply Present Logic Output Thermal Regulation Maximizes Charge Rate Without Risk of Overheating Programmable Charge Current Detection/Termination Programmable Charge Termination Timer Smart Pulsing Error Feature SmartStart™ Prolongs Battery Life 20µA Charger Quiescent Current in Shutdown Available in a Low Profile (0.75mm) 10-Lead (3mm × 3mm) DFN Package

USB Power Manager with Low-Loss Ideal Diode and Li-Ion Battery Charger Features: Seamless Transition Between Input Power Sources: Li-Ion Battery, USB and 5V Wall Adapter Low Loss (50mΩ) Ideal Diode Path from BAT to OUT Programmable Charge Current Detection (CHRG) Load Dependent Charging Guarantees USB Input Current Compliance Analog Gas Gauge Function Charges Single Cell Li-Ion Batteries Directly from USB Port Constant-Current/Constant-Voltage Operation with Thermal Feedback to Maximize Charging Rate Without Risk of Overheating* Selectable 100% or 20% Current Limit (e.g., 500mA/100mA) Termination Timer Adapts to Actual Charge Current Preset 4.2V Charge Voltage with 0.8% Accuracy (4.1V for LTC4066-1) NTC Thermistor Input for Temperature Qualied Charging Thin Prole (0.75mm) 24-Lead 4mm x 4mm QFN Package Ultrathin Prole (0.55mm) 24-Lead 4mm x 4mm UTQFN Package (LTC4066 Only)

USB Power Manager with OVP and Li-Ion/Polymer Charger Features: Programmable Input Current Limit: Single Resistor at CLPROG Pin to Set and Monitor Input Current Battery Charger/Ideal Diode/Controller: 13V Overvoltage Protection Full Featured Battery Charger with 4.2V Float Up to 1.25A Programmable Charge Current Thermal Regulation Maximizes Charge Current Without Risk of Overheating Internal 2 Hour Termination Timer from Onset of Voltage Mode Charging Automatic Load Switchover to Battery Power with Internal Ideal Diode and Drive Output for Optional External MOSFET NTC Thermistor Input Bad Battery Time-Out Detection 4mm × 3mm 12-Lead DFN Package

Standalone Linear Li-Ion Battery Charger with Programmable Termination Features: Programmable Charge Current Up to 950mA Complete Linear Charger in DFN Package No MOSFET, Sense Resistor or Blocking Diode Required Thermal Regulation Maximizes Charge Rate Without Risk of Overheating* Charges Directly from a USB Port Programmable Charge Current Termination Preset 4.2V Charge Voltage with ±1% Accuracy Charge Current Monitor Output for Gas Gauging* Automatic Recharge Charge Status Output “AC Present” Output 2.9V Trickle Charge Threshold (LTC4068) Available Without Trickle Charge (LTC4068X) Soft-Start Limits Inrush Current Low Profile (3mm x 3mm x 0.75mm) DFN Package

Current, Voltage, and Charge Monitor forHigh Voltage Battery Packs Features: Measures Battery Stack Voltage, Current and Power Indicates Accumulated Battery Charge and Energy 20-Bit Current Measurement with <1μV Offset Built-In Isolated isoSPI™ or SPI Interface LTC68xx/ADBMS68xx Compatible, Supports Synchronous Measurements with Cell Monitors Up to 12 Buffered Voltage Measurement Inputs Up to 5 GPIOs, Configurable to Drive Ground, Supply or Toggling at 400kHz High or Low Side Current Sense 0.3% Current and Voltage Accuracy 1% Energy and Charge Accuracy True Average ADCs I2C EEPROM Interface to Store Board Calibration Factors Threshold Registers for all Measured Quantities Engineered for ISO26262 Compliant Systems Open Wire Detection on Input Pins Available in 48-Lead LQFP Package AEC-Q100 Qualified for Automotive Applications

Ultra-Low Power Battery Gas Gauge Features: Operating Supply Current <1.0μA Supply Voltage from 1.8V to 60V 0V to 60V Sense Voltage for Low-Side or High-Side Sensing Fast 16-bit ADC Measures Voltage, Current and Temperature 1% Voltage, Current and Charge Accuracy No Crystal or other Time Reference Required Programmable Deadband Prevents Charge Drift Includes Battery Voltage Watchdog Includes Precision Temperature Sensor Programmable Alerts and Min/Max Tracking Registers Auxiliary ADC Input for Sensor Readout I2C/SMBus Interface Available in Small 10-Lead 3mm × 2mm DFN Package

Dual Input USB/AC Adapter Li-Ion Battery Charger with 600mA Buck Converter Features: Charges Single-Cell Li-Ion Battery from Wall Adapter and USB Inputs Automatic Input Power Detection and Selection Charge Current Programmable Up to 950mA from Wall Adapter Input Adjustable Output, High Efciency 600mA Synchronous DC/DC Converter No External MOSFET, Sense Resistor or Blocking Diode Needed Thermal Regulation Maximizes Charge Rate Without Risk of Overheating* Preset Charge Voltage with ±0.6% Accuracy Programmable Charge Current Termination 1.5MHz Constant Frequency Operation (Step-Down Converter) 18μA USB Suspend Current in Shutdown “Power Present” Status Output Charge Status Output Automatic Recharge Available in a Thermally Enhanced, Low Prole (0.75mm) 16-Lead (5mm × 3mm) DFN Package

Micropower USB Power Manager with Li-Ion Charger, Always-On LDO and Buck Regulator Features: 12μA Standby Mode Quiescent Current (All Outputs On) Seamless Transition Between Input Power Sources: Li-Ion/Polymer Battery and USB 240mΩ Internal Ideal Diode Provides Low Loss PowerPath™ High Efficiency 200mA Buck Regulator Always-On 150mA Low Dropout (LDO) Linear Regulator Pushbutton On/Off Control With System Reset Full Featured Li-Ion/Polymer Battery Charger Programmable Charge Current With Thermal Limiting Instant-On Operation With Discharged Battery 3mm × 3mm × 0.75mm 20-Pin QFN Package

Micropower USB Power Manager with Li-Ion Charger, Always-On LDO and Buck Regulator Features: 12μA Standby Mode Quiescent Current (All Outputs On) Seamless Transition Between Input Power Sources: Li-Ion/Polymer Battery and USB 240mΩ Internal Ideal Diode Provides Low Loss PowerPath™ High Efficiency 200mA Buck Regulator Always-On 150mA Low Dropout (LDO) Linear Regulator Pushbutton On/Off Control With System Reset Full Featured Li-Ion/Polymer Battery Charger Programmable Charge Current With Thermal Limiting Instant-On Operation With Discharged Battery 3mm × 3mm × 0.75mm 20-Pin QFN Package