Power and Current Monitor Features: Four-Quadrant Power Measurement ±5% Power Measurement Accuracy 4V to 80V High Side Sense, 100V Max Current Mode Power and Current Outputs Output Bandwidth Exceeds 500kHz ±3% Current Measurement Accuracy 6V to 80V Supply Range, 100V Max Inverting and Noninverting Open-Collector Comparator Outputs Available in 12-Pin DFN (3mm × 3mm) and 12-Lead MSOP Packages

32VIN, 2A Module (Power Module) Power Tracking Battery Charger Features:Complete Battery Charger SystemInput Supply Voltage Regulation Loop for Peak Power Tracking in MPPT (Maximum Peak Power Tracking) Solar ApplicationsResistor Programmable Float Voltage Up to 14.4V on the LTM8062 and 18.8V on the LTM8062AWide Input Voltage Range: 4.95V to 32V (40V Abs Max)2A Charge CurrentAccommodates Li-Ion/Polymer, LiFePO4, SLAIntegrated Input Reverse Voltage ProtectionUser Selectable Termination: C/10 or Termination Timer0.75% Float Voltage Reference Accuracy9mm × 15mm × 4.32mm LGA Package

Dual, 2-Phase Synchronous Step-Down DC/DC Controllers Features: Dual, 180° Phased Controllers Reduce Required Input Capacitance and Power Supply Induced Noise Accurate Multiphase Current Matching RSENSE or DCR Current Sensing ±0.75% 0.6V Output Voltage Accuracy Phase-Lockable Fixed Frequency 250kHz to 780kHz High Efficiency: Up to 95% Dual N-channel MOSFET Synchronous Drive Wide VIN Range: 4V to 38V (40V Max) Operation Wide VOUT Range: 0.6V to 12.5V Operation Adjustable Soft-Start Current Ramping or Tracking Foldback Output Current Limiting Output Overvoltage Protection Power Good Output Voltage Monitor 5V Low Dropout Regulator Small 28-Lead QFN and Narrow SSOP Packages

100VIN Micropower Isolated Flyback Converter with 150V/260mA Switch Features: 6V to 100V Input Voltage Range 260mA, 150V Internal DMOS Power Switch Low Quiescent Current 70µA in Sleep Mode 330µA in Active Mode Boundary Mode Operation at Heavy Load Low-Ripple Burst Mode® Operation at Light Load Minimum Load <0.5% (Typ) of Full Output VOUT Set with a Single External Resistor No Transformer Third Winding or Opto-Isolator Required for Regulation Accurate EN/UVLO Threshold and Hysteresis Internal Compensation and Soft-Start 5-Lead TSOT-23 Package AEC-Q100 Qualified for Automotive Applications

SMBus Programmable CCFL Switching Regulator Features: Wide Battery Input Range: 4.5V to 30V Grounded Lamp or Floating Lamp Configurations Open Lamp Protection Precision 100µA Full-Scale DAC Programming Current 2-Wire SMBus Interface Two Selectable SMBus Addresses DAC Setting Is Retained in Shutdown

15V Dual 3A Monolithic Step-Down Regulator for DDR Power Features: 3.6V to 15V Input Voltage Range ±3A Output Current per Channel Up to 95% Efficiency Selectable 90°/180° Phase Shift Between Channels Adjustable Switching Frequency: 500kHz to 4MHz VTTR = VDDQ/2 = VTT Reference ±1.6% Accurate VTTR at 0.75V Optimal VOUT Range: 0.6V to 3V ±10mA Buffered Output Supplies VREF Reference Voltage Current Mode Operation for Excellent Line and Load Transient Response External Clock Synchronization Short-Circuit Protected Input Overvoltage and Overtemperature Protection Power Good Status Outputs Available in (4mm × 5mm) QFN-28 and Thermally Enhanced 28-Lead TSSOP Packages

15V, 200mA Synchronous Buck-Boost DC/DC Converter with 1.3A Quiescent Current Features:Regulates VOUT Above, Below or Equal to VINWide VIN Range: 2.42V to 15V, 1.92V to 15V After Start-Up (Bootstrapped)Wide VOUT Range: 1.4V to 15.75V200mA Output Current in Buck ModeSingle Inductor1.3μA Quiescent CurrentProgrammable Maximum Power Point Control1.2MHz Ultralow Noise PWMCurrent Mode ControlPin Selectable Burst Mode® OperationUp to 95% EfficiencyAccurate RUN Pin ThresholdPower Good Indicator10nA Shutdown CurrentThermally Enhanced 3mm × 3mm QFN and 16-Lead MSOP Packages

Dual, 2-Phase, Synchronous Controller with Low Value DCR Sensing and Temperature Compensation Features: Low Value DCR Current Sensing Programmable DCR Temperature Compensation ±0.5% 0.6V Output Voltage Accuracy Dual True Remote Sensing Differential Amplifiers Phase-Lockable Fixed Frequency 250kHz to 720kHz Dual, 180° Phased Controllers Reduce Required Input Capacitance and Power Supply Induced Noise Dual N-Channel MOSFET Synchronous Drive Wide VIN Range: 4.5V to 38V Operation Output Voltage Range with Low DCR: 0.6V to 3.5V, without Low DCR: 0.6V to 5V Adjustable Soft-Start Current Ramping or Tracking Foldback Output Current Limiting Clock Input and Output for Up to 12-Phase Operation Short-Circuit Soft Recovery Output Overvoltage Protection Power Good Output Voltage Monitor 40-Lead QFN Packages AEC-Q100 Qualified for Automotive Applications

Multichemistry Buck Battery Charger Controller with Digital Telemetry System Features: Multichemistry Li-Ion/Polymer, LiFePO4, or Lead-Acid Battery Charger with Termination High Efficiency Synchronous Buck Battery Charger Digital Telemetry System Monitors VBAT, IBAT, RBAT, NTC Ratio (Battery Temperature), VIN, IIN, VSYSTEM, Die Temperature Coulomb Counter and Integrated 14-Bit ADC Wide Charging Input Voltage Range: 4.5V to 35V Wide Battery Voltage Range: Up to 35V Input Undervoltage Charge Current Limit Loop Maximum Power Point Tracking Optional I2C Serial Port Control Input Current Limit Prioritizes System Load Output Input and Output Ideal Diodes Provide Low Loss PowerPath™ Operation Instant-On Operation with Discharged Battery

High Efficiency, Synchronous, 4-Switch Buck-Boost Controller Features: Single Inductor Architecture Allows VIN Above, Below or Equal to the Regulated VOUT Programmable Input or Output Current Wide VIN Range: 4V to 38V 1% Output Voltage Accuracy: 0.8V < VOUT < 38V Synchronous Rectification: Up to 98% Efficiency Current Mode Control Phase-Lockable Fixed Frequency: 200kHz to 600kHz No Reverse Current During Start-Up Power Good Output Voltage Monitor Internal 5.5V LDO Quad N-Channel MOSFET Synchronous Drive VOUT Disconnected from VIN During Shutdown True Soft-Start and VOUT Short Protection, Even in Boost Mode Available in 28-Lead QFN (4mm × 5mm) and 28-Lead SSOP Packages