The HMC539ALP3/539ALP3E is a broadband5-bit GaAs IC digital attenuator in a low cost leadless surface mount package. This single positive control line per bit digital attenuator utilizes an offchip AC ground capacitor for near DC operation,making it suitable for a wide variety of RF and IFapplications. Covering DC to 4 GHz, the insertion loss is less than 0.7 dB typical. The attenuatorbit values are 0.25 (LSB), 0.5, 1, 2, and 4 dB for atotal attenuation of 7.75 dB. Attenuation accuracy isexcellent at ? 0.05 dB typical step error. The attenu-ator also features a high IIP3 of +62 dBm. Five TTL/CMOS control inputs are used to select each attenuation state. A single Vdd bias of +3V to +5V is required.Applications Cellular infrastructure ISM, MMDS, WLAN, WiMAX, WiBro Microwave radio and VSAT Test equipment and sensors

The HMC540SLP3E is a broadband 4-bit Silicon IC digital attenuator in a low cost leadless surface mount package. This single positive control line per bit digital attenuator utilizes off chip AC ground capacitors for near DC operation, making it suitable for a wide variety of RF and IF applications. Covering 0.1 to 8 GHz, the insertion loss is less than 1 dB typical. The attenuator bit values are 1 (LSB), 2, 4 and 8 dB for a total attenuation of 15 dB. Attenuation accuracy is excellent at ? 0.2 dB typical step error. The attenuator also features a IIP3 of +56dBm. Four TTL/CMOS control inputs are used to select each attenuation state. It can operate with a single Vdd ranging from +3.3V to 5V.APPLICATIONS Cellular Infrastructure ISM, MMDS, WLAN, WiMAX, WiBro Microwave Radio & VSAT Test Equipment and Sensors

The HMC574AMS8E is low-cost SPDT switchin 8-lead MSOP packages for use in transmit/receive applications which requires very lowdistortion at high incident power levels. Thedevice can control signals from DC to 3 GHz andis especially suited for Cellular/3G infrastructure,WiMAX and WiBro applications with only 0.3 dBtypical insertion loss. The design provides 5 wattpower handling performance and +63 dBm thirdorder intercept at +8 Volt bias. RF1 and RF2 arereflective shorts when ?Off.?Applications Cellular/3G infrastructure Private mobile radio handsets WLAN, WiMAX and WiBro Automotive telematics Test equipment

The HMC618ALP3E is a GaAs pHEMT MMIC Low Noise Amplifier that is ideal for Cellular/3G and LTE/WiMAX/4G basestation front-end receivers operating between 1.2 - 2.2 GHz. The amplifier has been optimized to provide 0.75 dB noise figure, 19 dB gain and +36 dBm output IP3 from a single supply of +5V. Input and output return losses are excellent and the LNA requires minimal external matching and bias decoupling components. The HMC618ALP3E shares the same package and pinout with the HMC617LP3E 0.55 - 1.2 GHz LNA. The HMC618ALP3E can be biased with +3V to +5V and features an externally adjustable supply current which allows the designer to tailor the linearity performance of the LNA for each application. The HMC618ALP3E offers improved noise figure versus the previously released HMC375LP3(E) and the HMC382LP3(E).Applications Cellular/3G and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femto Cells Public Safety Radio

The HMC797APM5E is a GaAs MMIC pHEMT Distributed Power Amplifier which operates between DC and 22 GHz. The amplifier provides 15 dB of gain, +29 dBm of output power at 1 dB gain compression, +31 dBm of saturated output power, and 25% PAE while requiring 400 mA from a +10 V supply. With up to +41 dBm of output IP3, the HMC797APM5E is ideal for high linearity applications in military and space as well as test equipment where high order modulations are used. This versatile PA exhibits a positive gain slope from 2 to 20 GHz making it ideal for EW, ECM, Radar and test equipment applications. The HMC797APM5E amplifier I/Os are internally matched to 50 ? facilitating integration into mutli-chip-modules (MCMs), is packaged in a leadless QFN 5x5 mm surface mount package, and requires no external matching components.Applications Test Instrumentation Military & Space Fiber Optics

The HMC802ALP3E is a broadband bidirectional 1-bitGaAs IC digital attenuator in a low cost leadless sur-face mount package. This single positive control linedigital attenuator utilizes off chip AC ground capac-itors for near DC operation, making it suitable for awide variety of RF and IF applications. Covering DCto 10 GHz, the insertion loss is less than 3 dB typicaland attenuation accuracy is excellent at ?0.6 dB typ-ical. The attenuator also features a high IIP3 of +55dBm. One TTL/CMOS control input is used to selectthe attenuation state and a single Vdd bias of +5V isrequired. Applications Test equipment and sensors ISM, MMDS, WLAN,?WiMAX, WiBro Microwave radio & VSAT Cellular infrastructure

The HMC8205BF10 is a gallium nitride (GaN) broadband power amplifier delivering 45.5 dBm (35 W) with 38% power added efficiency (PAE) across an instantaneous bandwidth of 0.3 GHz to 6 GHz. No external matching is required to achieve full band operation. Additionally, no external inductor is required to bias the amplifier. Also, dc blocking capacitors for the RFIN and RFOUT pins are integrated into the HMC8205BF10.The HMC8205BF10 is ideal for pulsed or continuous wave(CW) applications, such as military jammers, wirelessinfrastructure, radar, and general-purpose amplification.The HMC8205BF10 amplifier is a 10-lead ceramic leaded chip carrier (LDCC).The HMC8205BCHIPS is a gallium nitride (GaN), broadbandpower amplifier that delivers 45.5 dBm (35 W) with 40% poweradded efficiency (PAE) across an instantaneous bandwidth of0.4 GHz to 6 GHz. No external matching is required to achievefull band operation. No external inductor is required to bias theamplifier. In addition, dc blocking capacitors for the RFIN andRFOUT pins are integrated into the HMC8205BCHIPS.The HMC8205BCHIPS is ideal for pulsed or continuous wave(CW) applications, such as military jammers, wirelessinfrastructure, radar, and general-purpose amplification.APPLICATIONS Military jammers Commercial and military radar Power amplifier stage for wireless infrastructure? Test and measurement equipment

The HMC8415LP6GE is a gallium nitride (GaN), power amplifier, delivering 40 W (46 dBm) with more than 37.5% power added efficiency (PAE) across a bandwidth of 9 GHz to 10.5 GHz.The HMC8415LP6GE is ideal for pulsed applications, such as wireless weather, marine, and military radar applications.APPLICATIONS Weather radars Marine radars Military radars

The HMC8500PM5E is a gallium nitride (GaN), broadbandpower amplifier delivering 10 W (40 dBm), typical, with up to 55% power added efficiency (PAE) across an instantaneousbandwidth of 0.01 GHz to 2.8 GHz, at an input power of 30 dBm. The typical gain flatness is 3 dB at small signal levels.The HMC8500PM5E is ideal for pulsed or continuous wave(CW) applications, such as wireless infrastructure, radars,public mobile radios, and general-purpose amplification.The HMC8500PM5E amplifier is externally tuned using lowcost, surface-mount components and is available in a compactLFCSP package.Note that, throughout this data sheet, multifunction pins, such as RFIN/VGG, are referred to either by the entire pin name or by a single function of the pin, for example, RFIN, when only that function is relevantAPPLICATIONS Extended battery operation for public mobile radios Power amplifier stage for wireless infrastructures Test and measurement equipment Commercial and military radars General-purpose transmitter amplification

The HMC951A is a compact gallium arsenide (GaAs), monolithic microwave integrated circuit (MMIC), in-phase quadrature (I/Q) downconverter in a RoHS compliant package that operates from 5.6 GHz to 8.6 GHz. This device provides a small signal conversion gain of 13 dB with a noise figure of 2 dB and an image rejection of 32 dBc. The HMC951A uses a low noise amplifier (LNA) followed by an image mixer that is driven by a local oscillator (LO) buffer amplifier. The image reject mixer eliminates the need for a filter following the LNA and removes thermal noise at the image frequency. The IF1 and IF2 mixer outputs are provided and an external 90? hybrid is needed to select the required sideband. The I/Q mixer topology reduces the need for filtering of unwanted sideband. The HMC951A is a smaller alternative to hybrid style, single sideband (SSB) downconverter assemblies, and it eliminates the need for wire bonding by allowing the use of surface-mount manufacturing techniques.The HMC951A is available in 4 mm ? 4 mm, 24-lead lead frame chip scale package (LFCSP) and operates over the ?40?C to +85?C temperature range. An evaluation board for the HMC951A is also available upon request. Applications Point to point and point to multipoint radios Military radars, electronic warfare, and electronic intelligence Satellite communications Sensors