High Linearity Differential RF/IF Amplifier/ADC Driver Features: 50.0dBm OIP3 at 240MHz into a 100Ω Diff Load NF = 3.0dB at 240MHz 20MHz to 2000MHz Bandwidth 15.2dB Gain A-Grade 100% OIP3 Tested at 240MHz 1.0nV/√Hz Total Input Noise S11 < –15dB Up to 1.2GHz S22 < –15dB Up to 1.2GHz >2.75VP-P Linear Output Swing P1dB = 24.0dBm Insensitive to VCC Variation 100Ω Differential Gain-Block Operation Input/Output Internally Matched to 100Ω Diff Single 5V Supply DC Power = 800mW Unconditionally Stable 4mm × 4mm, 24-Lead QFN Package

100MHz to 40GHz Linear-in-dB RMS Power Detector with 35dB Dynamic Range Features: Ultra Wide Matched Input Frequency Range: 100MHz to 40GHz 35dB Linear Dynamic Range (< ±1dB Error) 29mV/dB Logarithmic Slope ±1dB Flat Response from 200MHz to 30GHz Accurate RMS Power Measurement of High Crest Factors (Up to 12dB) Modulated Waveforms Low Power Shutdown Mode Low Supply Current: 30mA at 3.3V (Typical) Small 2mm × 2mm Plastic DFN8 Package I-Grade: –40°C to 105°C Rated H-Grade: –40°C to 125°C Rated with Guaranteed Log-Slope and Log-Intercept ESD Rating: 3500V HBM, 1500V CDM

RF ATTENUATOR 50GHZ DIE; Frequency Max:50000MHz; Frequency Min:0MHz; Attenuation - Typical:2dB; RF Attenuator Type:Fixed Attenuator; Insertion Loss:-; Control Voltage Min:-; Control Voltage Max:-; RF Input Power:27dBm; RF IC Case Style:Die; No. of Pins:-; Operating Temperature Max:85°C; Operating Temperature Min:-55°C; Packaging:Each; Product Range:-; MSL:-; SVHC:No SVHC (20-Jun-2016)

RF AMP 19DB 18GHZ 3.5V DIE; Frequency Min:6GHz; Frequency Max:18GHz; Gain:19dB; Noise Figure Typ:1.6dB; RF IC Case Style:Die; No. of Pins:-; Supply Voltage Min:-; Supply Voltage Max:3.5V; Operating Temperature Min:-55°C; Operating Temperature Max:85°C; Packaging:Each; Product Range:HMC903G Series; Automotive Qualification Standard:-; MSL:-; SVHC:No SVHC (20-Jun-2016)

RF AMPLIFIER 5.5-8.5GHZ QFN-24; Frequency Min:5.5GHz; Frequency Max:8.5GHz; Gain:31dB; Noise Figure Typ:-; RF IC Case Style:QFN; No. of Pins:24Pins; Supply Voltage Min:-; Supply Voltage Max:-; Operating Temperature Min:-40 C; ;RoHS Compliant: Yes

RF AMP 19DB 1.2-2.2GHZ 5V QFN-16; Frequency Min:1.2GHz; Frequency Max:2.2GHz; Gain:19dB; Noise Figure Typ:0.75dB; RF IC Case Style:QFN; No. of Pins:16Pins; Supply Voltage Min:3V; Supply Voltage Max:5V; Packaging:Cut Tape; MSL:-

The ADRF5047 is a reflective, single-pole, four-throw (SP4T) switch manufactured in the silicon process.The ADRF5047 operates from 9 kHz to 44 GHz with an insertion loss of lower than 2.7 dB and an isolation of higher than 31 dB. The device has a radio frequency (RF) input power handling capability of 26.5 dBm for both through path and hot switching.The ADRF5047 draws a low current of 3 ?A on the positive supply of +3.3 V, and ?110 ?A on the negative supply of ?3.3 V. The device provides complementary metal-oxide semiconductor (CMOS)-/low voltage transistor-transistor logic (LVTTL)-compatible controls.The ADRF5047 is pin-compatible with the ADRF5046 fast switching version, which operates from 100 MHz to 44 GHz.The ADRF5047 comes in a 20-terminal, 3 mm ? 3 mm, RoHS-compliant, land grid array (LGA) package and operates from ?40?C to +105?C.Applications Industrial scanner Test instrumentation Cellular infrastructure?mmWave 5G Military radios, radars, and electronic counter measures (ECMs) Microwave radios and very small aperture terminals (VSATs)

The ADRF5300 is a reflective, SPDT switch manufactured in the silicon process.The ADRF5300 is developed for 5G applications ranging from 24 GHz to 32 GHz. The ADRF5300 has a low insertion loss of 1.1 dB, a high isolation of 38 dB, and an RF input power handling capability of 28 dBm average and 36 dBm peak.The ADRF5300 incorporates a negative voltage generator (NVG) to operate with a single positive supply of 3.3 V (VDD) applied to the VDD pin. The device employs CMOS- and low voltage transistor to transistor logic (LVTTL)-compatible controls.The ADRF5300 is packaged in a 20-terminal, 3 mm ? 3 mm, RoHS-compliant, land grid array (LGA) package and can operate from ?40?C to +105?C.APPLICATIONSIndustrial scannerTest instrumentationCellular infrastructure: 5G millimeter waveMilitary radios, radars, electronic counter measures (ECMs)Microwave radios and very small aperture terminals (VSATs)

The ADRF5045 is a general-purpose, single-pole, four-throw (SP4T) switch manufactured using a silicon process. It comes in a 24-terminal land grid array (LGA) package and provides high isolation and low insertion loss from 9 kHz to 30 GHz.This broadband switch requires dual supply voltages, +3.3 V and ?3.3 V, and provides complementary metal-oxide semiconductor (CMOS)/low voltage transistor-transistor logic (LVTTL) logiccompatible control.Applications Test instrumentation Microwave radios and very small aperture terminals (VSATs) Military radios, radars, and electronic counter measures (ECMs) Broadband telecommunications systems

The LTC5510 is a high linearity mixer optimized for applications requiring very wide input bandwidth, low distortion, and low LO leakage. The chip includes a double-balanced active mixer with an input buffer and a high speed LO amplifier. The input is optimized for use with 1:1 transmission line baluns, allowing very wideband impedance matching. The mixer can be used for both up- and down-conversion and can be used in wideband systems.The LO can be driven differentially or single-ended and requires only 0dBm of LO power to achieve excellent distortion and noise performance, while also reducing external drive circuit requirements. The LTC5510 offers low LO leakage, greatly reducing the need for output filtering to meet LO suppression requirements.The LTC5510 is optimized for 5V but can also be used with a 3.3V supply with slightly reduced performance. The shutdown function allows the part to be disabled for further power savings.Applications Wideband Receivers/Transmitters Cable Downlink Infrastructure HF/VHF/UHF Mixer Wireless Infrastructure