x2 Active Multiplier SMT, 27 - 31 GHz Fout Features: Very High Output Power: +20 dBm Low Input Power Drive: -2 to +6 dBm Very High Fo, 3Fo Isolation: >55 dBc @ Fout= 29 GHz 100 kHz SSB Phase Noise: -128 dBc/Hz Single Supply: +5V @ 213 mA 24 Lead 4×4mm QFN Package: 16mm2

2GHz to 14GHz Microwave Mixer with Integrated LO Frequency Doubler Features: Upconversion or Downconversion High IIP3: +28.2dBm at 5.8GHz +22.8dBm at 12GHz 8.0dB Conversion Loss at 5.8GHz +14.3dBm Input P1dB at 5.8GHz Integrated LO Buffer: 0dBm LO Drive Bypassable Integrated LO Frequency Doubler Low LO-RF Leakage: <–30dBm 50Ω Single-Ended RF, LO and IF Ports 3.3V/115mA Supply Fast Turn ON/OFF for TDD Operation 2mm × 3mm, 12-Lead QFN Package

Dual 1.6GHz to 2.7GHz High Dynamic Range Downconverting Mixer Features: Conversion Gain: 8.3dB at 2.35GHz IIP3: 27.3dBm at 2.35GHz Noise Figure: 9.8dB at 2.35GHz 15.3dB NF Under 5dBm Blocking High Input P1dB 47dB Channel-to-Channel Isolation 3.3V Supply, 1.3W Power Consumption Low Power Mode for 0.8W Consumption Independent Channel Shutdown Control 50Ω Single-Ended RF and LO Inputs LO Input Matched In All Modes 0dBm LO Drive Level Small Package and Solution Size –40°C to 105°C Operation

300MHz to 3.5GHz Ultra-High Dynamic Range Downconverting Mixer Features: +36dBm Input IP3 2.4dB Conversion Gain Low Noise Figure: <10dB +18dBm Ultra High Input P1dB 670mW Power Consumption 2.5V to 3.6V Operation 50Ω Single-Ended RF and LO Inputs 0dBm LO Drive Level Low Power Mode –40°C to 105°C Operation (TC) Small Solution Size Enable Pin 16-Lead (4mm × 4mm) QFN Package

High Linearity Differential RF/IF Amplifier/ADC Driver Features: 51.0dBm OIP3 at 240MHz into a 100Ω Diff Load NF = 2.9dB at 240MHz 20MHz to 2060MHz –3dB Bandwidth 20.8dB Gain A-Grade 100% OIP3 Tested at 380MHz 0.6nV/√Hz Total Input Noise S11 < –10dB Up to 1.4GHz S22 < –10dB Up to 1.4GHz >2.75VP-P Linear Output Swing P1dB = 24.0dBm Insensitive to VCC Variation 100Ω Differential Gain-Block Operation Input/Output Internally Matched to 100Ω Diff Single 5V Supply DC Power = 850mW 4mm × 4mm, 24-Lead QFN Package

SMT GaAs HBT MMIC Divide-by-4, DC - 12 GHz Features: Ultra Low SSB Phase Noise: -149 dBc/Hz Wide Bandwidth Output Power: -6 dBm Single DC Supply: +5V S8G SMT Package

High IP3 Mixer SMT, 450 - 500 MHz Features: Input IP3: +32 dBm Conversion Loss: 9.5 dB Low External Part Count Ultra Small MSOP8 Package: 14.8 mm²

1.5GHz to 2.5GHz High Linearity Direct Quadrature Modulator Features: Direct Conversion from Baseband to RF High Output: –2.5dB Conversion Gain High OIP3: +21.6dBm at 2GHz Low Output Noise Floor at 20MHz Offset: No RF: –158.6dBm/Hz POUT = 4dBm: –152.5dBm/Hz Low Carrier Leakage: –39.4dBm at 2GHz High Image Rejection: –41.2dBc at 2GHz 4-Channel W-CDMA ACPR: –67.7dBc at 2.14GHz Integrated LO Buffer and LO Quadrature Phase Generator 50Ω AC-Coupled Single-Ended LO and RF Ports High Impedance DC Interface to Baseband Inputs with 0.5V Common Mode Voltage 16-Lead QFN 4mm × 4mm Package

HMC288MS8E series Attenuator Evaluation Board

High-Performance, Low Distortion 500 MHz Mixer Features: Doubly Balanced Mixer Low Distortion +24 dBm Third Order Intercept (IP3) +10 dBm 1 dB Compression Point Bandwidth 500 MHz RF and LO Input Bandwidths 250 MHz Differential Current IF Output DC to >200 MHz Single-Ended Voltage IF Output Low LO Drive Required: –10 dBm Single- or Dual-Supply Operation DC Coupled Using Dual Supplies All Ports May Be DC Coupled No Lower Frequency Limit—Operation to DC User-Programmable Power Consumption