The AD5625R/AD5645R/AD5665R and AD5625/AD5665 members of the nanoDAC® family are low power, quad, 12-/14-/16-bit, buffered voltage-out DACs with/without an on-chip reference. All devices operate from a single 2.7 V to 5.5 V supply, are guaranteed monotonic by design, and have an I2C-compatible serial interface.The AD5625R/AD5645R/AD5665R have an on-chip reference. The LFCSP versions of the AD5625R/AD5645R/AD5665R have a 1.25 V or 2.5 V, 10 ppm/°C reference, giving a full-scale output range of 2.5 V or 5 V; the TSSOP versions of the AD5625R/AD5645R/AD5665R have a 2.5 V, 5 ppm/°C reference, giving a full-scale output range of 5 V. The WLCSP has a 1.25 V reference. The on-chip reference is off at power-up, allowing the use of an external reference. The internal reference is enabled via a software write. The AD5625/AD5665 require an external reference voltage to set the output range of the DAC.The device incorporates a power-on reset circuit that ensures that the DAC output powers up to 0 V (POR = GND) or midscale (POR = VDD) and remains there until a valid write occurs. The on-chip precision output amplifier enables rail-to-rail output swing.The AD5625R/AD5645R/AD5665R and AD5625/AD5665 use a 2-wire I2C-compatible serial interface that operates in standard (100 kHz), fast (400 kHz), and high speed (3.4 MHz) modes.Applications Process control Data acquisition systems Portable battery-powered instruments Digital gain and offset adjustment Programmable voltage and current sources Programmable attenuators

Dual 5V, 2A Synchronous Step-Down DC/DCs in Tiny LQFN and WLCSP Features: Dual Outputs Each with 2A Output Current High Efficiency: 19mΩ NMOS and 75mΩ PMOS Wide Bandwidth, Fast Transient Response Switching Frequency Synchronizable Up to 3MHz VIN Range: 2.25V to 5.5V VOUT Range: 0.5V to VIN VOUT Accuracy: ±1% Low Ripple Burst Mode® Operation Peak Current Mode Control Minimum On-Time: 25ns Safely Tolerates Inductor Saturation in Overload Shutdown Current: 1.2µA Precision 400mV Enable Thresholds Internal Soft-Start and Compensation Power Good Output Low Profile, Thermally Enhanced 12-Lead 2mm × 2mm × 0.74mm LQFN and 16-Ball 1.64mm × 1.64mm × 0.5mm WLCSP Packages AEC-Q100 Qualified for Automotive Applications

Low Noise, Low Drift Single-Supply Operational Amplifiers (Dual) Features: Single- or dual-supply operation  Low noise: 4.7 nV/√Hz @ 1 kHz  Wide bandwidth: 3.4 MHz  Low offset voltage: 100 μV  Very low drift: 0.2 μV/°C  Unity gain stable  No phase reversal 

High Speed, Fast Settling Precision Operational Amplifier Features:FAST  Slew Rate: 50 V/µs Min Settling Time (0.01%): 1 µs Max Gain Bandwidth Product: 10 MHz Typ Excellent Radiation HardnessPRECISE Common Mode Rejection: 88 dB Min Open Loop Gain: 500 V/mV Min Offset Voltage: 750 µV Max Bias Current: 200 pA Max Available in Die Form

Ultralow Noise, 150 mA CMOS Linear Regulator Features: Chinese data sheet available Ultralow noise: 9 μV rms, independent of VOUT No additional noise bypass capacitor required Stable with 1 μF ceramic input and output capacitors Maximum output current: 150 mA Input voltage range: 2.2 V to 5.5 V Low quiescent current IGND = 10 μA with zero load Low shutdown current: <1 μA Low dropout voltage: 105 mV at 150 mA load Initial output voltage accuracy: ±1% Up to 14 fixed output voltage options: 1.8 V to 3.3 V PSRR performance of 70 dB at 10 kHz Current limit and thermal overload protection Logic-controlled enable 5-lead TSOT package 4-ball, 0.8 mm × 0.8 mm, 0.4 mm pitch WLCSP AEC-Q100 qualified for automotive applications

Delay Lines/Timing Elements brdbnd Analog Time Delay SMT DC-24 GHz

Data Conversion IC Development Tools LTC2157-14: 14-bit, 250Msps, 1.8V Dual A

RF Amplifier LNA w/Failsafe Bypass , 700-1200 MHz

Data Conversion IC Development Tools LTC2472, Selectable 208sps/833sps, 16-Bi

Data Conversion IC Development Tools LTC2266-12 - 12-Bit, 80Msps, 1.8V Dual S