The ADG901/ADG902 are wideband switches that use a complementary metal-oxide semiconductor (CMOS) process to provide high isolation and low insertion loss to 1 GHz. The ADG901 is an absorptive (matched) switch with 50 ? terminated shunt legs, while the ADG902 is a reflective switch. These devices are designed such that the isolation is high over the dc to 1 GHz frequency range. These switches enable the user to pass dc signals up to 0.5 V without the use of a dc blocking capacitor. They have on-board CMOS control logic, thus eliminating the need for external controlling circuitry. The control inputs are both CMOS and LVTTL compatible. The low power consumption of these CMOS devices makes them ideally suited to wireless applications and general-purpose high frequency switching.Product Highlights 40 dB Off Isolation at 1 GHz 0.8 dB Insertion Loss at 1 GHz 17 dBm P1dB at 1 GHzApplications Wireless communications General purpose RF switching Dual-band applications High speed filter selection Digital transceiver front-end switch IF switching Tuner modules Antenna diversity switching list

Touch Screen Controllers Touch Screen Digitizer with Dac I.C.

Micropower, Dual-Channel Digital Isolators, Default Low (2/0 Channel Directionality) Features: Ultralow power operation 3.3 V operation 6 μA per channel quiescent current, refresh enabled 0.3 μA per channel quiescent current, refresh disabled 148 μA/Mbps per channel typical dynamic current 116 μA/Mbps per channel typical dynamic current Quad-channel products available See datasheet for additional features

Triple-Channel, Digital Isolator, Enhanced System-Level ESD Reliability (2/1 channel directionality) Features: Enhanced system-level ESD performance per IEC 61000-4-x Low power operation 5 V operation 2.0 mA per channel maximum at 0 Mbps to 2 Mbps 4.1 mA per channel maximum at 10 Mbps 36 mA per channel maximum at 90 Mbps 3.3 V operation 1.0 mA per channel maximum at 0 Mbps to 2 Mbps 2.8 mA per channel maximum at 10 Mbps 17 mA per channel maximum at 90 Mbps Bidirectional communication 3.3 V/5 V level translation High temperature operation: 105°C High data rate: dc to 90 Mbps (NRZ) Precise timing characteristics 2 ns maximum pulse width distortion 2 ns maximum channel-to-channel matching High common-mode transient immunity: >25 kV/μs Output enable function 16-lead SOIC wide body, RoHS-compliant package Safety and regulatory approvals UL recognition: 2500 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A VDE Certificate of Conformity DIN V VDE V 0884-10 (VDE V 0884-10): 2006-12 VIORM = 560 V peak CQC Certification per GB4943.1-2011

Quad 8-Bit Multiplying CMOS D/A Converter with Memory Features: Four DACs in a 28 Pin, 0.6 Inch Wide DIP or 28-Pin JEDEC Plastic Chip Carrier ±1/4 LSB Endpoint Linearity Guaranteed Monotonic DACs Matched to Within 1% Microprocessor Compatible Read/Write Capability (with Memory) TTL/CMOS Compatible Four-Quadrant Multiplication Single-Supply Operation (+5 V) Low Power Consumption Latch-Up Resistant Available in Die Form

Microprocessor Supervisory Circuit with Watchdog Feature, 4.65V Threshold Voltage, Low Supply Current and Active Low Reset Output. Upgrade for ADM699 Features: Superior Upgrade for ADM698/ADM699, MAX698/MAX699 Guaranteed RESET Assertion with VCC = 1 V Low 70 µA Supply Current Precision 4.65 V Voltage Monitor Power OK/Reset Time Delay Power OK/Reset Time Delay Watchdog Timer Minimum Component Count Performance Specified over Temperature ADM8698 is obsolete

3 V, LVDS, Quad CMOS Differential Line Receiver Features: ±8 kV ESD IEC 61000-4-2 contact discharge on receiver input pins 400 Mbps (200 MHz) switching rates 100 ps channel-to-channel skew (typical) 3.3 ns propagation delay (maximum) 3.3 V power supply High impedance outputs on power-down Please see data sheet for additional features.

1.2 A, 20 V, 700 kHz Nonsynchronous Step-down Switching Regulator Features: High efficiency, up to 91% 1.2 A maximum load current ±2% output accuracy over temperature range 700kHz (ADP2300) or 1.4MHz (ADP2301) switching frequency options Wide input voltage range: 3.0 V to 20 V Current-mode control architecture Output voltage from 0.8 V to 0.85×VIN See datasheet for additional features

2 A/1.2 A DC-to-DC Switching Regulator with Independent Positive and Negative Outputs Features: Wide input supply voltage range: 2.85 V to 15 V Generates well regulated, independently resistor programmable VPOS and VNEG outputs Boost regulator to generate VPOS output Adjustable positive output to 39 V Integrated 2.0 A main switch Optional single-ended primary-inductor converter (SEPIC) configuration for automatic step-up/step-down Inverting regulator to generate VNEG output Adjustable negative output to VIN − 39 V Integrated 1.2 A main switch True shutdown for both positive and negative outputs 1.2 MHz/2.4 MHz switching frequency with optional external frequency synchronization from 1.0 MHz to 2.6 MHz Resistor programmable soft start timer Slew rate control for lower system noise Individual precision enable and flexible start-up sequence control for symmetric start, VPOS first, or VNEG first Out-of-phase operation UVLO, OCP, OVP, and TSD protection 4 mm × 4 mm, 20-lead LFCSP and 20-lead TSSOP −40°C to +125°C junction temperature range Supported by the ADIsimPower tool set

600 mA, Ultralow Noise, High PSRR, RF Linear Regulator Features: Input voltage range: 2.3 V to 5.5 V Maximum load current: 600 mA Low noise 0.9 µV rms total integrated noise from 100 Hz to 100 kHz 1.6 µV rms total integrated noise from 10 Hz to 100 kHz Noise spectral density: 1.5 nV/√Hz from 10 kHz to 1 MHz PSRR of 90 dB from 200 Hz to 200 kHz; 58 dB at 1 MHz, VOUT = 3.3 V, VIN = 3.8 V Dropout voltage: 120 mV typical at VOUT = 3.3 V, IOUT = 600 mA Initial accuracy: ±0.5% Accuracy over line, load, and temperature: −2.0%(minimum), +1.5% (maximum), from −40°C to +85°C Quiescent current, IGND = 4 mA at no load Low shutdown current: 0.2 μA Stable with a 10 µF ceramic output capacitor Adjustable and fixed output voltage options: 1.2 V, 1.8 V, 2.5 V, 2.8 V, 3.0 V, 3.3 V (16 standard voltages between 1.2 V and 3.3 V available) 8-lead LFCSP and 8-lead SOIC packages Precision enable Supported by ADIsimPower tool