Rail-to-Rail, Fast, Low Power 2.5 V to 5.5 V, Single-Supply TTL/CMOS Comparator Features: Fully specified rail-to-rail at VCC = 2.5 V to 5.5 V Input common-mode voltage from −0.2 V to VCC + 0.2 V Low glitch TTL-/CMOS-compatible output stage 40 ns propagation delay Low power 1 mW at 2.5 V Shutdown pin Programmable hysteresis Power supply rejection > 60 dB −40°C to +125°C operation

Rail-to-Rail, Fast, Low Power 2.5 V to 5.5 V, Single-Supply TTL/CMOS Comparator Features: Fully specified rail-to-rail at VCC = 2.5 V to 5.5 V Input common-mode voltage from −0.2 V to VCC + 0.2 V Low glitch TTL-/CMOS-compatible output stage 40 ns propagation delay Low power 1 mW at 2.5 V Shutdown pin Programmable hysteresis Power supply rejection > 60 dB −40°C to +125°C operation

4-Channel, 24 GHz, Receiver Downconverter Features: Integrated baluns for single-ended receiver (Rx) inputs and local oscillator (LO) input Rx channel gain: 22 dB Noise figure (NF): 10 dB P1dB: −10 dBm LO input range: −8 dBm to +5 dBm Rx to IF isolation: 30 dB RF signal bandwidth: 250 MHz Rx output impedance: 900 Ω differential LO input buffer: 24 GHz RF and LO S11 at 50 Ω: −5 dB Temperature sensor with analog output: ±5° Electrostatic discharge (ESD) performance Human body model (HBM): 2000 V Charged device model (CDM): 500 V Qualified for automotive applications

LC2MOS 15 V 4 Channel High Performance Analog Multiplexer Features: 44 V supply maximum ratings VSS to VDD analog signal range Low on resistance (100 Ω maximum) Low power (ISUPPLY < 75 µA) Fast switching Break-before-make switching action Plug-in replacement for DG408

High Voltage, Latch-Up Proof, 8-Channel Differential Multiplexer Features: Latch-up proof 3.5 pF off source capacitance 33 pF off drain capacitance 0.35 pC typical charge injection ±0.02 nA on channel leakage Low on resistance: 155 typical ±9 V to ±22 V dual-supply operation 9 V to 40 V single-supply operation VSS to VDD analog signal range Human body model (HBM) ESD rating - 8 kV I/O port to supplies

Fault Protection, 6 RON, SPST Switch with 0.6 k Feedback Channel Features: Analog output protection and detection solution Overvoltage protection up to 60 V on S and SFB pins Power off protection up to 60 V on S and SFB pins Integrated 0.6 k secondary feedback channel Known output under all conditions User enabled, power-on condition pulls source to 0 V Known state without digital inputs present Latch-up immune Optimized resistance for measurement channel and feedback channel Low on resistance of 6 typical on signal channel Ultraflat, on resistance on signal channel 3 mm 2 mm LFCS VSS to VDD 2 V signal range Fully specified at ±15 V, ±20 V, +12 V, and +36 V ±5 V to ±22 V dual supply operation 8 V to 44 V single-supply operation

CMOS, 2.5 Low Voltage Differential 8 Channel Multiplexer Features: +1.8 V to +5.5 V single supply ±2.5 V dual supply 2.5 ON resistance 0.5 ON resistance flatness 100 pA leakage currents 40 ns switching times Differential 8-to-1 multiplexer 28-lead TSSOP package Low-power consumption TTL/CMOS-compatible inputs

300 mA, Low Dropout CMOS Linear Regulator Features: Maximum output current: 300 mA Input voltage range: 2.5 V to 5.5 V Light load efficient IGND = 75 μA with 100 μA load Low shutdown current: <1 μA Very low dropout voltage: 170 mV @ 300 mA load Initial accuracy: ±1% Accuracy over line, load, and temperature: ±2% 16 fixed output voltage options with tracking: 0.75 V to 3.3 V Low output noise: 40 μV rms High PSRR: 72 dB @ 1 kHz Stable with small 2.2 μF ceramic output capacitor See data sheet for additional features

Configurable, Dual 2 A/Single 4 A, Synchronous Step-Down DC-to-DC Regulator Features: Configurable 3 A/1 A or 2 A/2 A dual output load combinations or 4 A combined single output High efficiency: up to 95% Input voltage VIN: 2.75 V to 5.5 V Selectable fixed output: 0.8 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V or adjustable output voltage to 0.6 V minimum ±1.5% accuracy reference voltage Selectable fixed switching frequency: 300 kHz, 600 kHz, or 1.2 MHz Optimized gate slew rate for reduced EMI External synchronization or internal clock output Dual-phase, 180° shifted PWM channels Current mode for fast transient response, no current sense resistor required Pulse-skip under light load or forced PWM operation See data sheet for additonal features

20 V, 6 A, Synchronous, Step-Down DC-to-DC Regulator Features: Input voltage range: 4.5 V to 20 V Integrated MOSFET: 44 mΩ typical/11 mΩ typical Reference voltage: 0.6 V ± 1% Continuous output current: 6 A Programmable current-limit thresholdProgrammable switching frequency: 200 kHz to 1400 kHz Precision enable and power good External compensation Internal soft start with external adjustable option Startup into a precharged output Supported by ADIsimPower design tool