MULTIPLEXER 4X1 250MHZ 14SOIC; Multiplexer Configuration:4:1; No. of Circuits:4Circuits; On State Resistance Max:-; Supply Voltage Range:± 4V to ± 6V; Analogue Multiplexer Case:SOIC; No. of Pins:14Pins; Operating Temperature Min:-40°C; Operating Temperature Max:85°C; Packaging:Each; Product Range:AD8174 Series; Automotive Qualification Standard:-; MSL:MSL 1 - Unlimited; SVHC:No SVHC (20-Jun-2016); Analogue Switch Case Style:SOIC; Base Number:8174; Operating Temperature Range:-40°C to +85°C; Supply Current:9.7mA

IC ANALOG SWITCH DUAL SPDT CMOS LLCC 12PIN PLASTIC

RF Switch ICs 4x2 Switch Matrix SMT 0.2 - 3.0 GHz

The ADG758 and ADG759 are low voltage, CMOS analog multiplexers comprising eight single channels and four differential channels, respectively. The ADG758 switches one of eight inputs (S1–S8) to a common output, D, as determined by the 3-bit binary address lines A0, A1, and A2. The ADG759 switches one of four differential inputs to a common differential output as determined by the 2-bit binary address lines A0 and A1. An EN input on both devices is used to enable or disable the device. When disabled, all channels are switched OFF.Low power consumption and an operating supply range of 1.8 V to 5.5 V make the ADG758 and ADG759 ideal for battery-powered, portable instruments. All channels exhibit break-before-make switching action preventing momentary shorting when switching channels.These switches are designed on an enhanced submicron process that provides low power dissipation yet gives high switching speed, very low ON resistance and leakage currents. ON resistance is in the region of a few ohms and is closely matched between switches and very flat over the full signal range. These parts can operate equally well as either multiplexers or demultiplexers and have an input signal range that extends to the supplies. The ADG758 and ADG759 are available in 20-lead chip scale packages.PRODUCT HIGHLIGHTS  Small 20-Lead 4 mm × 4 mm Chip Scale Packages (CSP). Single/Dual Supply Operation. The ADG758 and ADG759 are fully specified and guaranteed with 3 V and 5 V single-supply and ±2.5 V dual-supply rails. Low RON (3 Ω Typical). Low Power Consumption (<0.01 µW). Guaranteed Break-Before-Make Switching Action.APPLICATIONS Data Acquisition Systems Communication Systems Relay Replacement Audio and Video Switching Battery-Powered Systems

The ADG801 and ADG802 are monolithic CMOS, single-pole, single throw (SPST) switches with on resistance of less than 0.4 Ω. These switches are designed using an advanced submicron process that provides extremely low on resistance, high switching speed, and low leakage currents.The low on resistance of <0.4 Ω makes these parts ideal for applications where low on resistance switching is critical.The ADG801 switch is normally open (NO), while the ADG802 is normally closed (NC). Each switch conducts equally well in both directions when on.PRODUCT HIGHLIGHTS Low on resistance (0.25 Ω typical) 1.8 V to 5.5 V single-supply operation. Tiny 6-lead SOT-23 and 8-lead MSOP packages. 400 mA current-carrying capability. Automotive temperature range from -40°C to +125°C. Pin compatible with ADG701 (ADG801) and ADG702 (ADG802).APPLICATIONS Power routing Cellular phones Modems PCMCIA cards Hard drives Data acquisition systems Communications systems Relay replacement Battery-powered systems

The ADG702 is a monolithic CMOS SPST switch. It is designed on an advanced submicron process that provides low power dissipation yet high switching speed, low on resistance, low leakage currents and -3 dB bandwidths of greater than 200 MHz can be achieved.The ADG701 / ADG702 can operate from a single 1.8 V to 5.5 V supply, making it ideal for use in battery-powered instruments and with Analog Devices' new generation of DACs and ADCs.ADG702 Functional Block Diagram shows that with a logic input of 1, the switch of the ADG701 is closed and that of the ADG702 is open. Each switch conducts equally well in both directions when on. The ADG702 are available in 5-lead SOT-23, 6-lead SOT-23, and 8-lead MSOP packages.PRODUCT HIGHLIGHTS 1.8 V to 5.5 V Single-Supply Operation. ADG702 offer high performance, including low on resistance and fast switching times, and are fully specified and guaranteed with 3 V and 5 V supply rails. Very Low RON (3 Ω Maximum at 5 V, 5 Ω Maximum at 3 V). At 1.8 V operation, RON is typically 40 Ω over the temperature range.  On Resistance Flatness RFLAT(ON) (1 Ω Maximum).  −3 dB Bandwidth > 200 MHz Low Power Dissipation. CMOS construction ensures low power dissipation.  Fast tON/tOFF. 

The HMC241 is a general-purpose nonreflective SP4T switch in a low cost leadless surface-mount package and a 16-lead QSOP package. Covering DC to 4 GHz, this switch offers high isolation and has a low insertion loss of 0.5 dB to 0.7 dB at 2 GHz. The switch offers a single positive bias and true TTL/CMOS compatibility. A 2:4 decoder is integrated on the switch requiring only two control lines and a positive bias to select each path, replacing four to eight control lines normally required by GaAs SP4T switches.Applications Base stations, repeaters, and portable wireless WLAN, WiMAX, and WiBro CATV/DBS Test equipment Wireless local loop

The HMC253 is a nonreflective SP8T switch in a leadless RoHS compliant 4 mm x 4 mm ceramic SMT package and a 24-lead QSOP package featuring wideband operation from DC to 3.5 GHz. The switch offers a single positive bias and true TTL/CMOS compatibility, enabling it to operate with 0/3 V control and a 5 V supply. A 3:8 decoder is integrated on the switch requiring only three control lines and a positive bias to select each path. The HMC253 SP8T will replace multiple configurations of SP4T and SPDT MMIC switches.Applications Base stations and repeaters WiMAX, WiBro, and fixed wireless Cellular/3G infrastructure CATV/DBS Military and HiRel Point to point radios Point to multipoint radios/LMDS VSAT

The HMC427LP3(E) is a low loss broadband positive control transfer switch in leadless surface mount package. Covering DC to 8 GHz, this switch offers high isolation and low insertion loss. The switch operates using a positive control voltage of 0/+5V and requires a fixed bias of +5V @ < 20 μA. * Blocking capacitors are required at ports RF1, 2, 3, & 4. Their value will determine the lowest transmission frequency.Applications Test Instrumentation  Fiber Optics & Broadband Telecom  Basestation Infrastructure  Microwave Radio & VSAT  Military Radios, Radar, & ECM

The HMC547 is a general-purpose broadband high isolation nonreflective GaAs MESFET SPDT switch in a ceramic 3 mm x 3 mm leadless surface-mount package or a low cost leadless QFN surface-mount plastic package. Covering DC to 28.0 GHz, the switch offers more than 40 dB isolation and less than 2 dB insertion loss at midband and features >50 dB isolation up to 5 GHz and >45 dB isolation up to 15 GHz. The wide bandwidth, fast switching, and compact size make this absorptive SPDT ideal for military EW/ECM and test equipment applications. The switch operates using complementary negative control voltage logic lines of −5/0 V and requires no bias supply.Applications Fiber optics and broadband telecom Microwave radios and VSAT Military, radar, and ECM Test instrumentation Basestation infrastructure