The ADG201A is a monolithic CMOS device comprising four independently selectable switches. They are designed on an enhanced LC2MOS process which gives an increased signal handling capability of ±15 V. These switches also feature high switching speeds and low RONThe ADG201A switches are turned on with a logic low on the appropriate control input. Each switch conducts equally well in both directions when ON and each has an input signal range that extends to the supplies. All switches exhibit break-before-make switching action for use in multiplexer applications. Inherent in the design is low charge injection for minimum transients when switching the digital inputs.

The MAX4581L/MAX4582L/MAX4583L are low-voltage,CMOS analog ICs configured as an 8-channel multiplexer(MAX4581L), two 4-channel multiplexers(MAX4582L), and three single-pole/double-throw(SPDT) switches (MAX4583L).These CMOS devices operate with a +2V to +12V singlesupply. Each switch can handle rail-to-rail analogsignals. Off-leakage current is only 2nA at +25°C.All digital inputs have 0.8V to 2.0V logic thresholds toensure TTL/CMOS-logic compatibility when using a+12V supply.ApplicationsAudio/Video Signal RoutingCommunications CircuitsData Acquisition SystemsDSL Modems

The MAX4731/MAX4732/MAX4733 low-voltage, dual,single-pole/single-throw (SPST) analog switches operatefrom a single +2V to +11V supply and handle rail-to-rail analog signals. These switches exhibit lowleakage current (0.1nA) and consume less than 0.5nW(typ) of quiescent power, making them ideal for battery-poweredapplications.When powered from a +3V supply, these switches feature50Ω (max) on-resistance (RON) with 3.5Ω (max)matching between channels, and 9Ω (max) flatness over the specified signal range.The MAX4731 has two normally open (NO) switches,the MAX4732 has two normally closed (NC) switches,and the MAX4733 has one NO and one NC switch. TheMAX4731/MAX4732/MAX4733 are available in 9-bumpchip-scale packages (UCSP™), along with 8-pin TDFNand 8-pin µMAX® packages. The tiny UCSP occupies a1.52mm x 1.52mm area and significantly reduces therequired PC board area.ApplicationsAudio/Video Signal RoutingBattery-Powered SystemsCell PhonesCommunications CircuitsLow-Voltage Data-Acquisition SystemsPDAs

The MAX4762–MAX4764/MAX4764A/MAX4765 dualSPDT (single-pole/double-throw) switches feature negativesignal capability that allows signals below ground topass through without distortion. These analog switchesoperate from a single +1.8V to +5.5V supply and havelow 0.6Ω on-resistance, making them ideal for switchingaudio signals.The MAX4763/MAX4765 include a comparator that canbe used for headphone detection or a mute/send keyfunction. The MAX4764/MAX4764A/MAX4765 have aninternal shunt switch to automatically discharge anycapacitance at the NO and NC connection points. Thisreduces click-and-pop sounds that occur when switchingaudio signals between precharged points.These SPDT switches are available in space-savingµMAX®, TDFN, thin QFN, and UCSP™ packages andoperate over the -40°C to +85°C extended temperaturerange.ApplicationsCell PhonesMP3 PlayersNotebook ComputersPDAs and Other Handheld Devices

The MAX4534 (single 4-to-1) and MAX4535 (dual 2-to-1) fault-protected multiplexers operate with ±4.5V to±20V dual supplies or a +9V to +36V single supply.These multiplexers feature fault-protected inputs, rail-to-rail signal-handling capability, and overvoltageclamping at 150mV beyond the rails. Both parts feature±40V overvoltage protection with supplies off and ±25Vprotection with supplies on. On-resistance is 400Ω maxand is matched between channels to 10Ω max. All digitalinputs have TTL logic thresholds, ensuringTTL/CMOS-logic compatibility when using a single+12V or dual ±15V supplies.ApplicationsAvionicsData AcquisitionIndustrial and Process ControlRedundant/Backup SystemsSignal Routing

The MAX4564 is a low-voltage, dual-supply, single-pole/double-throw (SPDT) analog switch designed to operate from dual ±1.8V to ±6V or single +1.8V to +12V supplies. The low on-resistance (RON = 40Ω at ±5V) and low power consumption (5µW) make this part ideal for audio, video, and battery-powered applications. This switch offers low leakage currents (1nA max) and fast switching speeds (tON = 60ns and tOFF = 40ns at ±5V, max).The MAX4564 is available in 8-pin SOT23 and µMAX® packages.ApplicationsAudio and Video SwitchingBattery-Operated SystemsCommunication SystemsCommunications CircuitsSample-and-Hold CircuitsTest Equipment

The MAX4591/MAX4592/MAX4593 are high-speed, precision, quad, single-pole/single-throw (SPST) analog switches designed to operate at +12V or +15V. The MAX4591 has four normally closed (NC) switches, and the MAX4592 has four normally open (NO) switches. The MAX4593 has two NO and two NC switches. All three devices offer low leakage (100pA max) and fast switching speeds (tON 80ns, tOFF 45ns).With a +12V supply, the MAX4591/MAX4592/MAX4593 offer guaranteed 1Ω max channel-to-channel matching, 20Ωs max on-resistance (RON), and 1.75Ω max RON flatness over the specified range.These switches are also fully specified for single +15V operation, with 16Ωs max RON, 1.5Ω max RON match, and 1.5Ω max flatness. For low-voltage or dual-supply operation, refer to the MAX391 data sheet.These low-voltage switches also offer 5pC max charge injection, and electrostatic discharge (ESD) protection is greater than 2000V, per Method 3015.7.ApplicationsCell PhonesComputers: Desktop, Workstation, ServerConsumer AudioDigital Television (Receivers, Set-Top Boxes)Network Hubs, Switches, Routers

The MAX4591/MAX4592/MAX4593 are high-speed, precision, quad, single-pole/single-throw (SPST) analog switches designed to operate at +12V or +15V. The MAX4591 has four normally closed (NC) switches, and the MAX4592 has four normally open (NO) switches. The MAX4593 has two NO and two NC switches. All three devices offer low leakage (100pA max) and fast switching speeds (tON 80ns, tOFF 45ns).With a +12V supply, the MAX4591/MAX4592/MAX4593 offer guaranteed 1Ω max channel-to-channel matching, 20Ωs max on-resistance (RON), and 1.75Ω max RON flatness over the specified range.These switches are also fully specified for single +15V operation, with 16Ωs max RON, 1.5Ω max RON match, and 1.5Ω max flatness. For low-voltage or dual-supply operation, refer to the MAX391 data sheet.These low-voltage switches also offer 5pC max charge injection, and electrostatic discharge (ESD) protection is greater than 2000V, per Method 3015.7.ApplicationsCell PhonesComputers: Desktop, Workstation, ServerConsumer AudioDigital Television (Receivers, Set-Top Boxes)Network Hubs, Switches, Routers

The MAX4614/MAX4615/MAX4616 quad, low-voltage, high-speed, single-pole/single-throw (SPST) analog switches are pin compatible with the industry-standard 74HC4066/MAX4610 analog switches. On-resistance (10Ω max) is matched between switches to 1Ω max and is flat (1Ω max) over the specified signal range. Each switch handles V+ to GND analog signal levels. Maximum off-leakage current is only 1nA at TA = +25°C and 6nA at TA = +85°C.The MAX4614 has four normally open (NO) switches, and the MAX4615 has four normally closed (NC) switches. The MAX4616 has two NO switches and two NC switches. These CMOS switches operate from a single +2V to +5.5V supply. All digital inputs have +0.8V and +2.4V logic thresholds, ensuring TTL/CMOS-logic compatibility when using a single +5V supply.ApplicationsAudio/Video Signal RoutingBattery-Powered ApplicationsCommunication SystemsLow-Voltage Data AcquisitionSample-and-Hold Circuits

The MAX4614/MAX4615/MAX4616 quad, low-voltage, high-speed, single-pole/single-throw (SPST) analog switches are pin compatible with the industry-standard 74HC4066/MAX4610 analog switches. On-resistance (10Ω max) is matched between switches to 1Ω max and is flat (1Ω max) over the specified signal range. Each switch handles V+ to GND analog signal levels. Maximum off-leakage current is only 1nA at TA = +25°C and 6nA at TA = +85°C.The MAX4614 has four normally open (NO) switches, and the MAX4615 has four normally closed (NC) switches. The MAX4616 has two NO switches and two NC switches. These CMOS switches operate from a single +2V to +5.5V supply. All digital inputs have +0.8V and +2.4V logic thresholds, ensuring TTL/CMOS-logic compatibility when using a single +5V supply.ApplicationsAudio/Video Signal RoutingBattery-Powered ApplicationsCommunication SystemsLow-Voltage Data AcquisitionSample-and-Hold Circuits