DAC 16BIT 1.2MSPS MSOP-8; Resolution (Bits):16bit; Sampling Rate:1.2MSPS; Input Channel Type:Serial; Supply Voltage Range:4.5V to 5.5V; ADC / DAC Case Style:MSOP; No. of Pins:8Pins; Data Interface:SPI; Operating Temperature Min:-40°C; Operating Temperature Max:85°C; Packaging:Each; Product Range:AD5543 Series; Automotive Qualification Standard:-; MSL:MSL 1 - Unlimited; SVHC:No SVHC (20-Jun-2016)

High Efficiency, Ground-Referenced Class-G Headphone Amplifier

Tiny I2C Programmable Linear Battery Charger with Power Path and USB Mode Compatibility Features: 2.6 mm x 2 mm WLCSP Package Fully programmable via I2C Flexible digital control inputs Up to 2.1 A current from an ac charger in LDO mode Operating input voltage from 4.0 V to 6.7 V Tolerant input voltage -0.5 V to +20 V (USB VBUS) Fully compatible with USB 3.0 and USB Battery Charging Specification 1.2 Built-in current sensing and limiting As low as 30 mΩ battery isolation FET between battery and charger output Thermal regulation prevents over heating Compliant with JEITA 1 and JEITA 2 Li-Ion battery charging temperature specifications SYS_EN flag permits the system to be disabled until battery is at minimum required level for guaranteed system start-up.

16-Bit, 20/40/65/80 MSPS, 1.8 V Analog-to-Digital Converter Features: 1.8 V analog supply operation 1.8 V to 3.3 V output supply SNR 77.6 dBFS at 9.7 MHz input 71.1 dBFS at 200 MHz input SFDR 93 dBc at 9.7 MHz input 80 dBc at 200 MHz input Low power 56 mW at 20 MSPS 113 mW at 80 MSPS Differential input with 700 MHz bandwidth See data sheet for additional featuresAD9266-EP supports defense and aerospace applications (AQEC standard) Download the AD9266-EP data sheet (pdf) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline Enhanced product change notification Qualification data available on request V62/12660 DSCC Drawing Number

Octal 5V 16bit SPI DAC with reference

14-Bit, 170 MSPS/210 MSPS/250 MSPS, 1.8 V Analog-to-Digital Converter (ADC) Features: SNR = 71.0 dBFS at 185 MHz AIN and 250 MSPS SFDR = 83 dBc at 185 MHz AIN and 250 MSPS −152.0 dBFS/Hz input noise at 200 MHz, −1 dBFS AIN, 250 MSPS Total power consumption: 390 mW at 250 MSPS 1.8 V supply voltages LVDS (ANSI-644 levels) outputs Integer 1-to-8 input clock divider (625 MHz maximum input) Sample rates of up to 250 MSPS IF sampling frequencies of up to 350 MHz Internal ADC voltage reference Flexible analog input range 1.4 Vp-p to 2.0 V p-p (1.75 Vp-p nominal) See data sheet for additional features

Synchronous Buck Controller with Constant On-Time and Valley Current Mode with Power Saving Mode Features: Power input voltage range: 2.95 V to 20 V On-board bias regulator Minimum output voltage: 0.6 V 0.6 V reference voltage with ±1.0% accuracy Supports all N-channel MOSFET power stages Available in 300 kHz, 600 kHz, and 1.0 MHz options No current-sense resistor required Power saving mode (PSM) for light loads (ADP1879 only) Resistor programmable current limit Power good with internal pull-up resistor Externally programmable soft-start See data sheet for additional features

High Voltage Latch-Up Proof, 4-/8-Channel Multiplexers Features: Latch-up proof 2.9 pF off source capacitance 17 pF off drain capacitance 0.4 pC charge injection Low on resistance: 160 Ω typical ±9 V to ±22 V dual-supply operation 9 V to 40 V single-supply operation 48 V supply maximum ratings Fully specified at ±15 V, ±20 V, +12 V, and +36 V See data sheet for additional featuresADG5208-EP supports defense and aerospace applications (AQEC standard) Download ADG5208-EP data sheet (pdf) Military temperature range: –55°C to +125°C Controlled manufacturing baseline One assembly and test site One fabrication site Enhanced product change notification Qualification data available on request V62/15601 DSCC Drawing Number

8-Channel Fault-Protected Analog Multiplexer

High Performance, Low Power, ISM Band FSK/GFSK/MSK/GMSK Transceiver IC