Low Power, 350 MHz Voltage Feedback Amplifiers Features: Low power 1 mA supply current/amp High speed 350 MHz, −3 dB bandwidth (G = +1) 425 V/μs slew rate Low cost Low noise 8 nV/√Hz @ 100 kHz 600 fA/√Hz @ 100 kHz Low input bias current: 750 nA maximum Low distortion -90 dB SFDR @ 1 MHz -65 dB SFDR @ 5 MHz Wide supply range: 3 V to 12 V Small packaging: 8-lead SOT-23, 5-lead SC70, and 8-lead SOIC

Compact, 800 mA, 3 MHz, Step-Down DC-to-DC Converter with an Internal Discharge Switch Features: Input voltage: 2.3 V to 5.5 V Peak efficiency: 95% 3 MHz fixed frequency operation Typical quiescent current: 24 μA Very small solution size 6-lead, 1 mm × 1.5 mm WLCSP package Fast load and line transient response 100% duty cycle low dropout mode Internal synchronous rectifier, compensation, and soft start Current overload and thermal shutdown protections Ultralow shutdown current: 0.2 μA (typical) Forced PWM and automatic PWM/PSM modes Supported by ADIsimPower™ design tool

400 MHz Low Cost Blackfin Processor Features: Performance to 400MHz/800MMACs enables multi-channel audio plus CIF video processing in multimedia applications Enhanced Dynamic Power Management with on-chip core voltage regulation allows operation to 0.8V extending battery life in portable applications Application-tuned peripherals provide glueless connectivity to general purpose converters in data acquisition applications Multiple low cost, pin- and code-compatible derivatives enable software differentiation in cost-sensitive consumer applications

DC/DC CTRL SYNC BUCK 1.5MHZ LFCSP-32; Supply Voltage Min:2.75V; Supply Voltage Max:20V; No. of Outputs:2 Output; Duty Cycle (%):50%; Controller IC Case Style:LFCSP; No. of Pins:32Pins; Switching Frequency:1.5MHz; Topology:Synchronous Buck (Step Down); Operating Temperature Min:-40°C; Operating Temperature Max:85°C; Packaging:Cut Tape; Product Range:ADP1850 Series; Automotive Qualification Standard:-; MSL:MSL 3 - 168 hours; SVHC:No SVHC (20-Jun-2016); No. of Outputs:2Outputs

Dual Power PLL Frequency Synthesizer Features: IDD total, 7.5 mA Bandwidth RF/IF, 2.4 GHz/1.0 GHz 2.7 V to 3.3 V power supply Separate VP allows extended tuning voltage Programmable dual modulus prescaler RF and IF: 8/9, 16/17, 32/33, 64/65 Programmable charge pump currents 3-wire serial interface Analog and digital lock detect Fastlock mode Power-down mode 20-lead TSSOP and 20-lead LFCSP packages

Dual 14-Bit, 20/40/65 MSPS, 3 V Analog-to-Digital Converter Features: Integrated Dual 14-Bit Analog-to-Digital Converters Single 3 V Supply Operation (2.7 V to 3.6 V) SNR = 71.6 dBc (to Nyquist, AD9248-65) SFDR = 80 dBc (to Nyquist, AD9248-65) Low Power: 300 mW at 65 MSPS Differential Input with 500 MHz 3 dB Bandwidth Exceptional Cross Talk Immunity > 85 dB On-Chip Reference and SHA Flexible Analog Input: 1 Vp-p to 2 Vp-p Range Offset Binary or Twos Complement Data Format Clock Duty Cycle Stabilizer Output datamux option

Amplifiers - OP AMP (OP AMP); No. of Amplifiers:1 Amplifier; Bandwidth:800kHz; Slew Rate:375V/ s; Supply Voltage Range:-; Amplifier Case Style:-; No. of Pins:16Pins; Operating Temperature Min:-; Operating Temperature Max:-; MSL:- ;RoHS Compliant: No

Quad 14-Bit nanoDAC+ with 2 ppm/C Reference, I2C Interface Features: High relative accuracy (INL): ±2 LSB maximum at 16 bits Low drift 2.5 V reference: 2 ppm/°C typical Tiny package: 3 mm × 3 mm, 16-lead LFCSP Total unadjusted error (TUE): ±0.1% of FSR maximum Offset error: ±1.5 mV maximum Gain error: ±0.1% of FSR maximum High drive capability: 20 mA, 0.5 V from supply rails User selectable gain of 1 or 2 (GAIN pin) Reset to zero scale or midscale (RSTSEL pin) 1.8 V logic compatibility Low glitch: 0.5 nV-sec 400 kHz I2C-compatible serial interface Low power: 3.3 mW at 3 V 2.7 V to 5.5 V power supply −40°C to +105°C temperature range

SigmaDSP Stereo, Low Power, 96 kHz, 24-Bit Audio Codec with Integrated PLL Features: SigmaDSP 28-/56-bit 50 MIPS digital audio processor Fully programmable with SigmaStudio graphical tool 24-bit stereo audio ADC and DAC: >98 dB SNR Sampling rates from 8 kHz to 96 kHz Low power: 7 mW record, 7 mW playback, 48 kHz at 1.8 V 6 analog input pins, configurable for single-ended or differential inputs Flexible analog input/output mixers Stereo digital microphone input PLL supporting input clocks from 8 MHz to 27 MHz Analog outputs: 2 differential stereo, 2 single-ended stereo, 1 mono headphone output driver Analog automatic level control (ALC) Microphone bias reference voltage Analog and digital I/O: 1.8 V to 3.65 V I2C and SPI control interfaces Digital audio serial data I/O: stereo and time-division multiplexing (TDM) modes Software-controllable clickless mute Software power-down GPIO pins for digital controls and outputs 32-lead, 5 mm × 5 mm LFCSP −40°C to +85°C operating temperature range

6-Channel, 256-Position Digital Potentiometer Features: 256 positions Multiple independently programmable channels AD5204—4-channel AD5206—6-channel Potentiometer replacement Terminal resistance of 10 kΩ, 50 kΩ, 100 kΩ 3-wire SPI-compatible serial data input +2.7 V to +5.5 V single-supply operation; ±2.7 V dual-supply operation Power-on midscale preset