600 mA, Ultralow Noise, High PSRR, RF Linear Regulator Features: Input voltage range: 2.3 V to 5.5 V Maximum load current: 600 mA Low noise 0.9 µV rms total integrated noise from 100 Hz to 100 kHz 1.6 µV rms total integrated noise from 10 Hz to 100 kHz Noise spectral density: 1.5 nV/√Hz from 10 kHz to 1 MHz PSRR of 90 dB from 200 Hz to 200 kHz; 58 dB at 1 MHz, VOUT = 3.3 V, VIN = 3.8 V Dropout voltage: 120 mV typical at VOUT = 3.3 V, IOUT = 600 mA Initial accuracy: ±0.5% Accuracy over line, load, and temperature: −2.0%(minimum), +1.5% (maximum), from −40°C to +85°C Quiescent current, IGND = 4 mA at no load Low shutdown current: 0.2 μA Stable with a 10 µF ceramic output capacitor Adjustable and fixed output voltage options: 1.2 V, 1.8 V, 2.5 V, 2.8 V, 3.0 V, 3.3 V (16 standard voltages between 1.2 V and 3.3 V available) 8-lead LFCSP and 8-lead SOIC packages Precision enable Supported by ADIsimPower tool

Ultralow Noise, 200 mA, Linear Regulator Features: PSRR performance of 54 dB at 100 kHz Ultralow noise independent of VOUT 3 μV rms, 0.1 Hz to 10 Hz 9.5 μV rms, 0.1 Hz to 100 kHz 9 µV rms, 10Hz to 100KHz 17 µV rms, 10Hz to 1MHz Low dropout voltage: 150 mV at 200 mA load Maximum output current: 200 mA Input voltage range: 2.2 V to 5.5 V Low quiescent and shutdown current Initial accuracy: ±1% Accuracy over line, load, and temperature: −2.5%/+1.5% 5-lead TSOT package and 6-lead LFCSP package

Microprocessor Supervisory Circuit with Watchdog Feature, 4.65V Threshold Voltage, Low Supply Current and Active Low Reset Output. Upgrade for ADM699 Features: Superior Upgrade for ADM698/ADM699, MAX698/MAX699 Guaranteed RESET Assertion with VCC = 1 V Low 70 µA Supply Current Precision 4.65 V Voltage Monitor Power OK/Reset Time Delay Power OK/Reset Time Delay Watchdog Timer Minimum Component Count Performance Specified over Temperature ADM8698 is obsolete

3 V, LVDS, Quad CMOS Differential Line Receiver Features: ±8 kV ESD IEC 61000-4-2 contact discharge on receiver input pins 400 Mbps (200 MHz) switching rates 100 ps channel-to-channel skew (typical) 3.3 ns propagation delay (maximum) 3.3 V power supply High impedance outputs on power-down Please see data sheet for additional features.

1.2 A, 20 V, 700 kHz Nonsynchronous Step-down Switching Regulator Features: High efficiency, up to 91% 1.2 A maximum load current ±2% output accuracy over temperature range 700kHz (ADP2300) or 1.4MHz (ADP2301) switching frequency options Wide input voltage range: 3.0 V to 20 V Current-mode control architecture Output voltage from 0.8 V to 0.85×VIN See datasheet for additional features

3-V, RS-232 Serial Port Driver-Receiver Features: Green Idle power-saving mode Single 2.7 V to 3.6 V power supply Operates with 3 V logic 0.1 µF to 1 µF charge pump capacitors Low EMI Low power shutdown: 20 nA Full RS-232 compliance 460 kb/s data rate One receiver active in shutdown (ADM3307E/ADM3311E/ADM3312E/ADM3315E) Two receivers active in shutdown (ADM3310E) ESD >15 kV IEC 1000-4-2 on RS-232 I/Os ESD >15 kV IEC 1000-4-2 on CMOS and RS-232 I/Os (ADM3307E) Qualified for automotive applications

High Speed, Fast Settling Precision Operational Amplifier Features:FAST  Slew Rate: 50 V/µs Min Settling Time (0.01%): 1 µs Max Gain Bandwidth Product: 10 MHz Typ Excellent Radiation HardnessPRECISE Common Mode Rejection: 88 dB Min Open Loop Gain: 500 V/mV Min Offset Voltage: 750 µV Max Bias Current: 200 pA Max Available in Die Form

1 MSPS, 14-Bit, Simultaneous Sampling SAR ADC with PGA and Four Comparators Features: Dual, simultaneous sampling, 14-bit, 2-channel ADC True differential analog inputs Programmable gain stage: ×1, ×2, ×3, ×4, ×6, ×8, ×12, ×16, ×24, ×32, ×48, ×64, ×96, ×128 Throughput rate per ADC 1 MSPS for AD7264 Analog input impedance: >1 GΩ Wide input bandwidth −3 dB bandwidth: 1.7 MHz at gain = 2 4 on-chip comparators SNR: 78 dB typical at gain = 2, 71 dB typical at gain = 32 Device offset calibration System gain calibration On-chip reference: 2.5 V −40°C to +105°C operation High speed serial interface Compatible with SPI, QSPI™, MICROWIRE™, and DSP 48-lead LFCSP and LQFP packages

+3/+5 Volt Serial-Input Micropower 10-Bit DAC Features: Micropower - 100 µA Single Supply - 2.7 V to 5.5 V Operation Compact 1.75 mm Height SO-8 Package and 1.1 mm Height TSSOP-8 Package AD7390 - 12-Bit Resolution AD7391 - 10-Bit Resolution SPI and QSPI Serial Interface Compatible with Schmitt Trigger Inputs

CMOS,12-Bit, Monolithic Multiplying DAC Features: Improved version of the obsoleted product, AD7541 Full 4 quadrant multiplication 12-bit linearity (endpoint) All parts guaranteed monotonic TTL/CMOS compatible Protection Schottky diodes not required Low logic input leakage