CMOS, 12-Bit Serial DACPORT Features: 12-Bit CMOS DAC with On-Chip Voltage Reference Output Amplifier Three Selectable Output Ranges -5 V to + 5 V, 0 V to +5 V, 0 V to +10 V Serial Interface 300 kHz DAC Update Rate Small Size: 16-Lead DIP or SOIC Nonlinearity: ±1/2 LSB Tmin to Tmax Low Power Dissipation: 100 mW Typical  

Quad,12-Bit nanoDAC with 5ppm/C On-Chip Reference Features: Low power, smallest pin-compatible, quad nanoDACs  AD5664R: 16 bits AD5644R: 14 bits AD5624R: 12 bits User selectable external or internal reference External reference default On-chip 1.25 V/2.5 V, 5 ppm/°C reference 10-lead MSOP; 10-lead, 3 mm × 3 mm LFCSP_WD; and 12-ball, 1.665 mm × 2.245 mm WLCSP 2.7 V to 5.5 V power supply Guaranteed monotonic by design Power-on reset to zero scale Per channel power-down Serial interface, up to 50 MHz

Dual 12-Bit nanoDAC+ with 2 ppm/C Reference, I2C Interface Features: Low drift 2.5 V reference: 2 ppm/°C typical Tiny package: 3 mm × 3 mm, 16-lead LFCSP Total unadjusted error (TUE): ±0.1% of full-scale range (FSR) maximum Offset error: ±1.5 mV maximum Gain error: ±0.1% of FSR maximum High drive capability: 20 mA, 0.5 V from supply rails User selectable gain of 1 or 2 (GAIN pin) Reset to zero scale or midscale (RSTSEL pin) 1.8 V logic compatibility Low glitch: 0.5 nV-sec 400 kHz I2C-compatible serial interface Low power: 3.3 mW at 3 V 2.7 V to 5.5 V power supply −40°C to +105°C temperature range

4-Channel, I2C, Ultralow Power 12-Bit ADC in 20-Lead LFCSP/TSSOP Features: I2C-compatible serial interface supports standard and fast modes Ultralow power: 90 μW typical at 3 V in fast mode Specified for VDD of 2.7 V to 5.25 V On-chip accurate 2.5 V reference, 5 ppm/°C typical drift 4 single-ended analog input channels ALERT function BUSY function Autocycle mode Wide input bandwidth 68 dB signal-to-noise ratio (SNR) typical at input frequency of 1 kHz Flexible power/throughput rate management No pipeline delays Power-down mode 550 nA typical at VDD = 5.25 V 435 nA typical at VDD = 3 V 20-lead LFCSP and TSSOP packages Temperature range: −40°C to +125°C

8-Channel, Low Noise, Low Power, 24-Bit, Sigma-Delta ADC with PGA and Reference Features: 3 power modes RMS noise Low power: 24 nV rms at 1.17 SPS, gain = 128 (255 µA typical) Mid power: 20 nV rms at 2.34 SPS, gain = 128 (355 µA typical) Full power: 23 nV rms at 9.4 SPS, gain = 128 (930 µA typical) Up to 22 noise free bits in all power modes (gain = 1) Output data rate Full power: 9.38 SPS to 19,200 SPS Mid power: 2.34 SPS to 4800 SPS Low power: 1.17 SPS to 2400 SPS Rail-to-rail analog inputs for gains > 1 Simultaneous 50 Hz/60 Hz rejection at 25 SPS (single cycle settling) Diagnostic functions (which aid safe integrity level (SIL) certification) Crosspoint multiplexed analog inputs 8 differential/15 pseudo differential inputs See data sheet for additional features

Low Input Bias Current, Wide BW JFET Precision Dual Op Amp Features: Low Noise 6 nV/√Hz Low Offset Voltage: 100 µV Max Low Input Bias Current 10 pA Max Fast Settling: 600 ns to 0.01% Low Distortion Unity Gain Stable No Phase Reversal Dual-Supply Operation: ±5 V to ±13 V

Fault Protection, 6 RON, SPST Switch with 0.6 k Feedback Channel Features: Analog output protection and detection solution Overvoltage protection up to 60 V on S and SFB pins Power off protection up to 60 V on S and SFB pins Integrated 0.6 k secondary feedback channel Known output under all conditions User enabled, power-on condition pulls source to 0 V Known state without digital inputs present Latch-up immune Optimized resistance for measurement channel and feedback channel Low on resistance of 6 typical on signal channel Ultraflat, on resistance on signal channel 3 mm 2 mm LFCS VSS to VDD 2 V signal range Fully specified at ±15 V, ±20 V, +12 V, and +36 V ±5 V to ±22 V dual supply operation 8 V to 44 V single-supply operation

CMOS, 2.5 Low Voltage Differential 8 Channel Multiplexer Features: +1.8 V to +5.5 V single supply ±2.5 V dual supply 2.5 ON resistance 0.5 ON resistance flatness 100 pA leakage currents 40 ns switching times Differential 8-to-1 multiplexer 28-lead TSSOP package Low-power consumption TTL/CMOS-compatible inputs

Low Voltage, 300 MHz Quad 2:1 Mux Analog HDTV Audio/Video Switch Features: Bandwidth: 300 MHz Low Insertion Loss and on Resistance: 5 typical On Resistance Flatness: 0.68 Typical Single 3 V/5 V Supply Operation Low Quiescent Supply Current: 1 nA Typical TTL/CMOS Compatible Fast switching times: tON, 7 ns; tOFF, 5 ns ESD protection 2 kV human body model (HBM) 200 V machine model (MM) 1 kV field-induced charged device model (FICDM)

Precision, Miniature MEMS IMU Features: Triaxial, digital gyroscope ±125°/sec, ±500°/sec, ±2000°/sec dynamic range models 2.3°/hr in-run bias stability (ADIS16507-1) 0.13°/√hr angular random walk, x-axis and y-axis, 1 σ (ADIS16507-1) ±0.25° axis to axis misalignment error Triaxial, digital accelerometer, ±392 m/sec2 dynamic range 125 μm/sec2 in-run bias stability, x-axis and y-axis, 1 σ Triaxial, delta angle and delta velocity outputs Factory calibrated sensitivity, bias, and axial alignment Calibration temperature range: −40°C to +85°C SPI compatible data communications Programmable operation and control Automatic and manual bias correction controls Data ready indicator for synchronous data acquisition External sync modes: direct, scaled, and output On demand self-test of inertial sensors On demand self-test of flash memory Single-supply operation (VDD): 3.0 V to 3.6 V 19,600 m/sec2 mechanical shock survivability Operating temperature range: −40°C to +105°C