Current, Voltage, and Charge Monitor forHigh Voltage Battery Packs Features: Measures Battery Stack Voltage, Current and Power Indicates Accumulated Battery Charge and Energy 20-Bit Current Measurement with <1μV Offset Built-In Isolated isoSPI™ or SPI Interface LTC68xx/ADBMS68xx Compatible, Supports Synchronous Measurements with Cell Monitors Up to 12 Buffered Voltage Measurement Inputs Up to 5 GPIOs, Configurable to Drive Ground, Supply or Toggling at 400kHz High or Low Side Current Sense 0.3% Current and Voltage Accuracy 1% Energy and Charge Accuracy True Average ADCs I2C EEPROM Interface to Store Board Calibration Factors Threshold Registers for all Measured Quantities Engineered for ISO26262 Compliant Systems Open Wire Detection on Input Pins Available in 48-Lead LQFP Package AEC-Q100 Qualified for Automotive Applications

60V, 1.5A LED Driver with Internal Exponential Scale Dimming Features: Operates in Boost, SEPIC, Buck Mode and Buck-Boost Mode 128:1 Internal Exponential Scale PWM Dimming Wide Input Voltage Range (3V to 60V) 1.5A, 60V Internal Switch 20000:1 External PWM Dimming at 100Hz ±2% LED Current and Output Voltage Regulation PMOS Switch Driver for PWM Dimming LED Short/Open Protection and Indication Constant Voltage and Constant Current Regulation Adjustable 300kHz to 2MHz Switching Frequency Adjustable 100Hz to 1kHz PWM Generator Frequency Internal Spread Spectrum Frequency Modulation Easy Synchronization to External Clock Programmable VIN UVLO with Hysteresis Available in 16-Lead MSOP Package

Low IQ Boost/SEPIC/Inverting Converter with 1.5A, 150V Switch Features: Wide Input Voltage Range: 2.8V to 60V Ultralow Quiescent Current and Low Ripple Burst Mode® Operation: IQ = 9µA 1.5A, 150V Power Switch Positive or Negative Output Voltage Programming with a Single Feedback Pin Programmable Frequency (100kHz to 500kHz) Synchronizable to an External Clock Spread Spectrum Frequency Modulation for Low EMI BIAS Pin for Higher Efficiency Programmable Undervoltage Lockout (UVLO) Thermally Enhanced 16-lead MSOP Package AEC-Q100 Qualified for Automotive Applications

Ultrathin 1.5A Module Thermoelectric Cooler (TEC) Regulator Features:Built-in Two Zero-Drift, Rail-to-Rail Chopper Amplifiers2.7V to 5.5V Input Voltage Range1.5A Driving Capability1% Accuracy 2.5V Internal Reference OutputIndependent Programmable Heating and Cooling Current LimitTEC Voltage and Current MonitoringProgrammable Maximum TEC VoltageDefault 2MHz Switching FrequencySynchronization from 1.85MHz to 3.25MHzCapable of NTC, PTC and RTD Thermal Sensors3.5mm 4mm 1.3mm LGA Package

42V, 5A/7A Peak Synchronous Step-Down Silent Switcher with 2.5A Quiescent Current Features: Silent Switcher® Architecture Ultralow EMI Emissions Optional Spread Spectrum Modulation High Efficiency at High Frequency Up to 96% Efficiency at 1MHz, 12VIN to 5VOUT Up to 95% Efficiency at 2MHz, 12VIN to 5VOUT Wide Input Voltage Range: 3.4V to 42V 5A Maximum Continuous, 7A Peak Transient Output Ultralow Quiescent Current Burst Mode® Operation 2.5µA IQ Regulating 12VIN to 3.3VOUT Output Ripple < 10mVP-P Fast Minimum Switch On-Time: 30ns Low Dropout Under All Conditions: 100mV at 1A Forced Continuous Mode Adjustable and Synchronizable: 200kHz to 3MHz Output Soft-Start and Power Good Small 20-Lead 4mm × 3mm LQFN Package AEC-Q100 Qualified for Automotive Applications

5 KV rms Isolated Precision Half-Bridge Driver, 4 A Output Features: 4 A peak output current Working voltage High-side or low-side relative to input: 537 V peak High-side to low-side differential: 800 V peak High frequency operation: 1 MHz maximum  3.3 V to 5 V CMOS input logic 4.5 V to 18 V output drive  UVLO at 2.5 V VDD1 ADuM3223A/ADuM4223A UVLO at 4.1 V VDD2 ADuM3223B/ADuM4223B UVLO at 7.0 V VDD2 ADuM3223C/ADuM4223C UVLO at 11.0 V VDD2 Precise timing characteristics  54 ns maximum isolator and driver propagation delay 5 ns maximum channel-to-channel matching CMOS input logic levels  High common-mode transient immunity:>25 kV/μs Enhanced system-level ESD performance per IEC 61000-4-x  High junction temperature operation: 125°C  Thermal shutdown protection  Default low output Safety and regulatory approvals ADuM4223 wide-body, 16-lead SOIC UL recognition per UL 1577  5000 V rms for 1 minute SOIC long package  CSA Component Acceptance Notice 5A  VDE certificate of conformity  DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 VIORM = 849 V peak  Qualified for automotive applications

Quad-Channel Isolators with Integrated DC-to-DC Converter (3:1 directionality) Features: isoPower integrated, isolated dc-to-dc converter 100 mA output supply AEC-Q100 qualified for automotive applications ADuM6421AW (ADuM6423AW pending) Meets CISPR 32/EN55032 Class B emission limits up to 5 Mbps at a full load on a 2-layer PCB Quad dc to 100 Mbps signal isolation channels 28-lead, fine pitch, SOIC with 8.3 mm minimum creepage High temperature operation: 125°C maximum High common-mode transient immunity: 100 kV/μs Safety and regulatory approvals (pending) UL recognition (pending) 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A (pending) VDE V 0884-11 certificate of conformity (pending) VIORM = 566 V peak CQC certification per GB4943.1-2011 (pending)

1 kV Dual Channel Digital Isolators (1/1 channel directionality) Features: Narrow-body, RoHS-compliant, 8-lead SOIC Safety and regulatory approvals UL recognition UL 1577: 1000 V rms for 1 minute Low power operation 5 V operation 2.4 mA per channel maximum at 0 Mbps to 1 Mbps 11.8 mA per channel maximum at 25 Mbps 3.3 V operation 1.7 mA per channel maximum at 0 Mbps to 1 Mbps 8.2 mA per channel maximum at 25 Mbps Bidirectional communication Up to 25 Mbps data rate (NRZ) 3 V/5 V level translation High temperature operation: 105°C High common-mode transient immunity: >15 kV/μs

16-Bit, Isolated, Sigma-Delta Modulator Features: 5 MHz to 21 MHz master clock input frequency Offset drift vs. temperature: ±0.25 μV/°C SNR: 82 dB typical 16 bits, no missing codes Full-scale analog input voltage range: ±64 mV ENOB: 13 bits typical IDD1: 10 mA maximum On-board digital isolator Operating temperature range: −40°C to +125°C High isolation common-mode transient immunity: 150 kV/μs minimum, VDD2 = 3.3 V Wide-body SOICs 16-lead SOIC_W 8-lead SOIC_IC with increased creepage Safety and regulatory approvals UL recognition 5700 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A VDE Certificate of Conformity DIN V VDE V 0884-10: VIORM = 1270 VPEAK DIN V VDE V 0884-11: VIORM = 1060 VPEAK (pending)

200 g Range, 3-Axis Digital Accelerometer Features: ±200 g measurement range Low power: 170 μA in measurement mode and 17 μA in standby mode at VS = 2.5 V (typical) User selectable bandwidth up to 3200 Hz ODR Fixed 13-bit output resolution Supply voltage range: 2.0 V to 3.6 V Embedded memory management system with FIFO technology minimizes host processor load Shock event detection Activity/inactivity monitoring SPI (3- or 4-wire) and I2C digital interfaces Wide temperature range: −40 to +125°C 10,000 g shock survival Pb free and RoHS compliant Small and thin: 32-lead, 5 mm × 5 mm × 1.45 mm LFCSP AEC-Q100 qualified for automotive applications