Isolated No-Opto Synchronous Flyback Controller with Wide Input Supply Range Features: Senses Output Voltage Directly from Primary Side Winding—No Opto-Isolator Required Synchronous Driver for High Efficiency Input Voltage Limited Only by External Power Components Accurate Output Regulation without User Trims Switching Frequency from 50kHz to 250kHz Synchronizable Load Compensation Programmable Undervoltage Lockout Available in a Thermally Enhanced 16-Lead TSSOP Package

16-Bit, 65Msps ADCs Features: Sample Rate: 65Msps/40Msps 79dB SNR and 100dB SFDR (2.25VP-P Range) SFDR >92dB at 140MHz (1.5VP-P Input Range) PGA Front End (2.25VP-P or 1.5VP-P Input Range) 700MHz Full Power Bandwidth S/H Optional Internal Dither Optional Data Output Randomizer Single 3.3V Supply Power Dissipation: 610mW/480mW Optional Clock Duty Cycle Stabilizer Out-of-Range Indicator Pin Compatible Family 105Msps: LTC2207 (16-Bit), LTC2207-14 (14-Bit) 80Msps: LTC2206 (16-Bit), LTC2206-14 (14-Bit) 65Msps: LTC2205 (16-Bit), LTC2205-14 (14-Bit) 40Msps: LTC2204 (16-Bit) 48-Pin (7mm × 7mm) QFN Package

16-Bit, 105Msps ADC Features: Sample Rate: 105Msps/80Msps 78.2dBFS Noise Floor 100dB SFDR SFDR >82dB at 250MHz (1.5VP-P Input Range) PGA Front End (2.25VP-P or 1.5VP-P Input Range) 700MHz Full Power Bandwidth S/H Optional Internal Dither Optional Data Output Randomizer Single 3.3V Supply Power Dissipation: 900mW/725mW Optional Clock Duty Cycle Stabilizer Out-of-Range Indicator Pin Compatible Family 105Msps: LTC2207 (16-Bit), LTC2207-14 (14-Bit) 80Msps: LTC2206 (16-Bit), LTC2206-14 (14-Bit) 65Msps: LTC2205 (16-Bit), LTC2205-14 (14-Bit) 40Msps: LTC2204 (16-Bit) 25Msps: LTC2203 (16-Bit) Single-Ended Clock 10Msps: LTC2202 (16-Bit) Single-Ended Clock 48-Pin 7mm × 7mm QFN Package

16-Bit, 65Msps ADCs Features: Sample Rate: 65Msps/40Msps 79dB SNR and 100dB SFDR (2.25VP-P Range) SFDR >92dB at 140MHz (1.5VP-P Input Range) PGA Front End (2.25VP-P or 1.5VP-P Input Range) 700MHz Full Power Bandwidth S/H Optional Internal Dither Optional Data Output Randomizer Single 3.3V Supply Power Dissipation: 610mW/480mW Optional Clock Duty Cycle Stabilizer Out-of-Range Indicator Pin Compatible Family 105Msps: LTC2207 (16-Bit), LTC2207-14 (14-Bit) 80Msps: LTC2206 (16-Bit), LTC2206-14 (14-Bit) 65Msps: LTC2205 (16-Bit), LTC2205-14 (14-Bit) 40Msps: LTC2204 (16-Bit) 48-Pin (7mm × 7mm) QFN Package

Low IQ Synchronous Step-Down Controller Features: Wide Output Voltage Range: 0.8V ≤ VOUT ≤ 10V Low Operating IQ: 80µA OPTI-LOOP® Compensation Minimizes COUT ±1% Output Voltage Accuracy Wide VIN Range: 4V to 36V Operation Phase-Lockable Fixed Frequency 140kHz to 650kHz Dual N-Channel MOSFET Synchronous Drive Very Low Dropout Operation: 99% Duty Cycle Adjustable Output Voltage Soft-Start or Tracking Output Current Foldback Limiting Output Overvoltage Protection Low Shutdown IQ: 10µA Selectable Continuous, Pulse-Skipping or Burst Mode® Operation at Light Loads Small 16-Lead Narrow SSOP or 3mm × 5mm DFN Package

Multiple Supply Hot Swap Controller with I2C Compatible Monitoring Features: Allows Safe Insertion into Live CompactPCI™ or PCI Express™ Backplane 8-Bit ADC Monitors Current and Voltage I2C™/SMBus Interface dI/dt Controlled Soft Start Simultaneous or Sequenced Turn-On ±20V Absolute Maximum Rating for ±12V Supplies No External Gate Capacitor Required Dual-Level Circuit Breaker and Current Limit Bus Precharge Output Power Good Input with Timeout Optional Latch-off or Autoretry After Faults Alerts Host After Faults Integrated LOCAL_PCI_RST# Logic 36-Pin SSOP and 38-Pin (5mm × 7mm) QFN Packages

12-Bit, 210Msps ADC Features: Sample Rate: 210Msps 65.5dB SNR 78dB SFDR 1.2GHz Full Power Bandwidth S/H Single 2.5V Supply Low Power Dissipation: 585mW LVDS, CMOS, or Demultiplexed CMOS Outputs Selectable Input Ranges: ±0.5V or ±1V No Missing Codes Optional Clock Duty Cycle Stabilizer Shutdown and Nap Modes Data Ready Output Clock Pin Compatible Family 250Msps: LTC2242-12 (12-Bit), LTC2242-10 (10-Bit) 210Msps: LTC2241-12 (12-Bit), LTC2241-10 (10-Bit) 170Msps: LTC2240-12 (12-Bit), LTC2240-10 (10-Bit) 185Msps: LTC2220-1 (12-Bit) 170Msps: LTC2220 (12-Bit), LTC2230 (10-Bit) 135Msps: LTC2221 (12-Bit), LTC2231 (10-Bit) 64-Pin 9mm × 9mm QFN Package

High Performance, Multiphase Energy, and Power Quality Measurement IC Features: 7 high performance ADCs 101 dB SNR Wide input voltage range: ±1 V, 707 mV rms FS at gain = 1 Differential inputs ±25 ppm/°C maximum channel drift (including ADC, internal VREF, PGA drift) enabling 10000:1 dynamic input range Class 0.2 metrology with standard external components Power quality measurements Enables implementation of IEC 61000-4-30 Class S VRMS ½, IRMS ½ rms voltage refreshed each half cycle 10 cycle rms/12 cycle rms Dip and swell monitors Line frequency—one per phase Zero crossing, zero-crossing timeout Phase angle measurements Supports CTs and Rogowski coil (di/dt) sensors Multiple range phase/gain compensation for CTs Digital integrator for Rogowski coils Flexible waveform buffer Able to resample waveform to ensure 128 points per line cycle for ease of external harmonic analysis Events, such as dip and swell, can trigger waveform storage Simplifies data collection for IEC 61000-4-7 harmonic analysis Advanced metrology feature set Total and fundamental active power, volt amperes reactive (VAR), volt amperes (VA), watthour, VAR hour, and VA hour Total and fundamental IRMS, VRMS Total harmonic distortion Power factor Supports active energy standards: IEC 62053-21 and IEC 62053-22; EN50470-3; OIML R46; and ANSI C12.20 Supports reactive energy standards: IEC 62053-23, IEC 62053-24 High speed communication port: 20 MHz serial port interface (SPI) Integrated temperature sensor with 12-bit successive approximation register (SAR) ADC ±3°C accuracy from −40°C to +85°C

MxFE Quad, 16-Bit, 12 GSPS RF DAC and Dual, 12-Bit, 6 GSPS RF ADC Features:Flexible reconfigurable common platform design 4 DACs and 2 ADCs (4D2A) and 2D2A options Supports single, dual, and quad band Datapaths and DSP blocks are fully bypassableDAC to ADC sample rate ratios of 1, 2, 3, and 4 On-chip PLL with multichip synchronization External RFCLK input option for off-chip PLL Maximum DAC sample rate up to 12 GSPS Maximum data rate up to 12 GSPS using JESD204C Useable analog bandwidth to 8 GHz Maximum ADC sample rate up to 6 GSPS Maximum data rate up to 6 GSPS using JESD204C Useable analog bandwidth to 8 GHz ADC ac performance at 6 GSPS, input at 2.7 GHz, 1 dBFS Full-scale input voltage: 1.475 V p-p Noise density: 147.5 dBFS/Hz Noise figure: 25.3 dB HD2: 72 dBFS HD3: 68 dBFS Worst other (excluding HD2 and HD3): 78 dBFS DAC ac performance at 12 GSPS, output at 2.6 GHz Full-scale output current range: 6.43 mA to 37.75 mA Two-tone IMD3 (6 dBFS per tone): 72 dBc NSD, single-tone: 160 dBc/Hz SFDR, single-tone: 75 dBc Versatile digital features Selectable interpolation and decimation filters Configurable DDC and DUC 8 fine complex DUCs and 4 coarse complex DUCs 8 fine complex DDCs and 4 coarse complex DDCs 48-bit NCO per DUC or DDC Option to bypass fine and coarse DUC/DDC Programmable 192-tap PFIR filter for receive equalization Supports 4 different profile settings loaded via GPIO Programable delay per data path Receive AGC support Fast detect with low latency for fast AGC control Signal monitor for slow AGC control Dedicated AGC support pins Transmit DPD support Fine DUC channel gain control and delay adjust Coarse DDC delay adjust for DPD observation path Auxiliary features Fast frequency hopping Direct digital synthesis (DDS) Low latency loopback modes (receive datapath data can be routed to the transmit datapaths) ADC clock driver with selectable divide ratios Power amplifier downstream protection circuitry On-chip temperature monitoring unit Flexible GPIO pins TDD power savings option SERDES JESD204B/JESD204C interface, 16 lanes up to 24.75 Gbps 8 lanes JESD204B/C transmitter (JT×) and 8 lanes JESD204B/C receiver (JR×) JESD204B compliance with the maximum 15.5 Gbps JESD204C compliance with the maximum 24.75 Gbps Supports real or complex digital data (8-, 12-, 16-, or 24-bit) 15 mm × 15 mm, 324-ball BGA with 0.8 mm pitch

Dual-Channel, 5 kV Isolators with Integrated DC/DC Converter (0/2 channel directionality) Features: isoPower integrated, isolated DC/DC converter Regulated 5 V or 3.3 V output Up to 400 mW output power Dual dc-to-25 Mbps (NRZ) signal isolation channels 16-lead SOIC package with 7.6 mm creepage High temperature operation: 105°C maximum High common-mode transient immunity: >25 kV/μs Safety and regulatory approvals UL recognition (pending) 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice #5A IEC 60601-1: 250 V rms, 8 mm package (RI-16-1) IEC 60950-1: 400 V rms, 8 mm package (RI-16-1) VDE certificate of conformity (RW-16) IEC 60747-5-2 (VDE 0884 Part 2):2003-01 VIORM = 846 V peak VDE certificate of conformity, 8 mm package (RI-16-1) DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 VIORM = 846 V peak