42V, 5A/7A Peak Synchronous Step-Down Silent Switcher with 2.5A Quiescent Current Features: Silent Switcher® Architecture Ultralow EMI Emissions Optional Spread Spectrum Modulation High Efficiency at High Frequency Up to 96% Efficiency at 1MHz, 12VIN to 5VOUT Up to 95% Efficiency at 2MHz, 12VIN to 5VOUT Wide Input Voltage Range: 3.4V to 42V 5A Maximum Continuous, 7A Peak Transient Output Ultralow Quiescent Current Burst Mode® Operation 2.5µA IQ Regulating 12VIN to 3.3VOUT Output Ripple < 10mVP-P Fast Minimum Switch On-Time: 30ns Low Dropout Under All Conditions: 100mV at 1A Forced Continuous Mode Adjustable and Synchronizable: 200kHz to 3MHz Output Soft-Start and Power Good Small 20-Lead 4mm × 3mm LQFN Package AEC-Q100 Qualified for Automotive Applications

RF Power Detector with Buffered Output and >40dB Dynamic Range Features: Internal Schottky Diode RF Detector with Two Input Power Ranges: LTC5505-1, –28dBm to 18dBm LTC5505-2, –32dBm to 12dBm Wide Input Frequency Range: 300MHz to 3GHz (LTC5505-1); 300MHz to 3.5GHz (LTC5505-2) Temperature Compensated Buffered Detector Output Wide VCC Range of 2.7V to 6V Low Operating Current: 0.5mA Low Shutdown Current: <2µA Low Profile (1mm) ThinSOT™ Package

Wide Input Range, No RSENSE Current Mode Boost, Flyback and SEPIC Controller Features: High Efficiency (No Sense Resistor Required) Wide Input Voltage Range: 2.5V to 36V Current Mode Control Provides Excellent Transient Response High Maximum Duty Cycle (92% Typ) ±2% RUN Pin Threshold with 100mV Hysteresis ±1% Internal Voltage Reference Micropower Shutdown: IQ = 10μA Programmable Operating Frequency (50kHz to 1MHz) with One External Resistor Synchronizable to an External Clock Up to 1.3 × fOSC User-Controlled Pulse Skip or Burst Mode® Operation Internal 5.2V Low Dropout Voltage Regulator Output Overvoltage Protection Capable of Operating with a Sense Resistor for High Output Voltage Applications Small 10-Lead MSOP Package

1kHz-3GHz High Signal Level Active Mixer Features: Broadband RF, LO and IF Operation High Input IP3: >20dBm from 30MHz to 900MHz +17dBm at 1900MHz Typical Conversion Gain: 1dB SSB Noise Figure: 11dB at 900MHz 14dB at 1900MHz Integrated LO Buffer: Insensitive to LO Drive Level Single-Ended or Differential LO Drive High LO-RF Isolation Enable Function 4.5V to 5.25V Supply Voltage Range 4mm x 4mm QFN Package

Standalone Linear Li-Ion Battery Charger with Thermal Regulation in ThinSOT Features: Programmable Charge Current Up to 800mA No MOSFET, Sense Resistor or Blocking Diode Required Complete Linear Charger in ThinSOT™ Package for Single Cell Lithium-Ion Batteries Constant-Current/Constant-Voltage Operation with Thermal Regulation* to Maximize Charge Rate Without Risk of Overheating Charges Single Cell Li-Ion Batteries Directly from USB Port Preset 4.2V Charge Voltage with ±1% Accuracy Charge Current Monitor Output for Gas Gauging* Automatic Recharge Charge Status Output Pin C/10 Charge Termination 25µA Supply Current in Shutdown 2.9V Trickle Charge Threshold (LTC4054) Available Without Trickle Charge (LTC4054X) Soft-Start Limits Inrush Current Available in 5-Lead SOT-23 Package

12-Bit, 105Msps Ultralow Power 1.8V ADCs Features: 70.8dB SNR 85dB SFDR Low Power: 124mW/103mW/87mW Single 1.8V Supply CMOS, DDR CMOS or DDR LVDS Outputs Selectable Input Ranges: 1VP-P to 2VP-P 800MHz Full-Power Bandwidth S/H Optional Data Output Randomizer Optional Clock Duty Cycle Stabilizer Shutdown and Nap Modes Serial SPI Port for Configuration Pin Compatible 14-Bit and 12-Bit Versions 40-Pin (6mm × 6mm) QFN Package

1.2A, Step-Down Switching Regulator in 3mm 3mm DFN Features: Wide Input Range: 3.6V to 36V Operating, 40V Maximum Up to 1.2A Output Current Resistor-Programmable Fixed-Frequency Operation from 200kHz to 3MHz Output Adjustable Down to 780mV Short-Circuit Robust Uses Tiny Capacitors and Inductors Soft-Start Low Shutdown Current: <2µA Low VCESAT Switch: 350mV at 1A Thermally Enhanced, Low Profile 3mm x 3mm DFN-8 and MSOP-8 Packages

Complete Isolated RS485/RS422 Module Transceiver + Power Features: RS485/RS422 Transceiver: 2500VRMS for 1 Minute UL-CSA Recognized File #E151738 CSA Component Acceptance Notice 5A Isolated DC Power: 5V at Up to 200mA No External Components Required 20Mbps or Low EMI 250kbps Data Rate High ESD: ±15kV HBM on Transceiver Interface High Common Mode Transient Immunity: 30kV/μs Integrated Selectable 120Ω Termination 3.3V (LTM2881-3) or 5.0V (LTM2881-5) Operation 1.62V to 5.5V Logic Supply Pin for Flexible Digital Interface Maximum Continuous Working Voltage: 560VPEAK High Input Impedance Failsafe RS485 Receiver Current Limited Drivers and Thermal Shutdown Compatible with TIA/EIA-485-A and PROFIBUS High Impedance Output During Internal Fault Condition Low Current Shutdown Mode (< 10μA) General Purpose CMOS Isolated Channel 15mm × 11.25mm BGA and LGA Packages

High Efficiency, Synchronous, 4-Switch Buck-Boost Controller Features: Single Inductor Architecture Allows VIN Above, Below or Equal to the Regulated VOUT Programmable Input or Output Current Wide VIN Range: 4V to 38V 1% Output Voltage Accuracy: 0.8V < VOUT < 38V Synchronous Rectification: Up to 98% Efficiency Current Mode Control Phase-Lockable Fixed Frequency: 200kHz to 600kHz No Reverse Current During Start-Up Power Good Output Voltage Monitor Internal 5.5V LDO Quad N-Channel MOSFET Synchronous Drive VOUT Disconnected from VIN During Shutdown True Soft-Start and VOUT Short Protection, Even in Boost Mode Available in 28-Lead QFN (4mm × 5mm) and 28-Lead SSOP Packages

Octal 12-/10-/8-Bit I2C VOUT DACs with 10ppm/C Reference Features: Integrated Precision Reference: 2.5V Full-Scale 10ppm/°C (LTC2637-L) 4.096V Full-Scale 10ppm/°C (LTC2637-H) Maximum INL Error: 2.5LSB (LTC2637-12) Low Noise: 0.75mVP-P 0.1Hz to 200KHz Guaranteed Monotonic Over –40°C to 125°C Temperature Range Selectable Internal or External Reference 2.7V to 5.5V Supply Range (LTC2637-L) Ultralow Crosstalk Between DACs (<3nV•s) Low Power: 100μA per DAC at 3V (LTC2637-L) Power-On-Reset to Zero-Scale/Mid-Scale Double-Buffered Data Latches Tiny 14-Lead 4mm × 3mm DFN and 16-Lead MSOP Packages