12 LVPECL/24 CMOS Output Clock Generator with Integrated 1.6 GHz VCO Features: Low phase noise, phase-locked loop (PLL) On-chip VCO tunes from 1.4 GHz to 1.8 GHz Optional external 3.3 V/5 V VCO/VCXO to 2.4 GHz 1 differential or 2 single-ended reference inputs Accepts CMOS, LVDS, or LVPECL references to 250 MHz Accepts 16.62 MHz to 33.3 MHz crystal for reference input Optional reference clock doubler Reference monitoring capability Automatic/manual reference holdover and reference switchover modes, with revertive switching Glitch-free switchover between references Automatic recovery from holdover Digital or analog lock detect, selectable Optional zero delay operation Twelve 1.6 GHz LVPECL outputs divided into 4 groups Each group of 3 outputs shares a 1-to-32 divider with phase delay Additive output jitter as low as 225 fs rms Channel-to-channel skew grouped outputs < 16 ps Each LVPECL output can be configured as 2 CMOS outputs (for fOUT ≤ 250 MHz) Automatic synchronization of all outputs on power-up Manual output synchronization available SPI- and I2C-compatible serial control port 64-lead LFCSP Nonvolatile EEPROM stores configuration settings

3-V, RS-232 Serial Port Driver-Receiver Features: Green Idle power-saving mode Single 2.7 V to 3.6 V power supply Operates with 3 V logic 0.1 µF to 1 µF charge pump capacitors Low EMI Low power shutdown: 20 nA Full RS-232 compliance 460 kb/s data rate One receiver active in shutdown (ADM3307E/ADM3311E/ADM3312E/ADM3315E) Two receivers active in shutdown (ADM3310E) ESD >15 kV IEC 1000-4-2 on RS-232 I/Os ESD >15 kV IEC 1000-4-2 on CMOS and RS-232 I/Os (ADM3307E) Qualified for automotive applications

Ultralow Power Voltage Detector with Disable Input and Low Threshold Voltages Features: Ultralow power consumption with ICC = 92 nA (typical) Precision, low voltage monitoring Pretrimmed voltage monitoring threshold options 20 options from 0.5 V to 1.9 V ±1.3% threshold accuracy over full temperature range Output disable input 23 µs to 26 µs typical propagation delay Open-drain type output Power supply glitch immunity Available in a 1.46 mm × 0.96 mm WLCSP Operational temperature range: −40°C to +85°C

5.7 kV RMS/1.5 kV RMS, Quad-Channel LVDS 2.5 Gigabit Isolator (0 Reverse Channels) Features: 5.7 kV rms and 1.5 kV rms LVDS isolators Complies with TIA/EIA-644-A LVDS signal levels Quad-channel configuration Any data rate up to 2.5 Gbps switching with low jitter 10 Gbps total bandwidth across four channels 2.15 ns typical propagation delay Typical jitter: 0.82 ps rms random, 40 ps total peak Lower power 1.8 V supplies ±8 kV IEC 61000-4-2 ESD protection across isolation barrier High common-mode transient immunity: 100 kV/μs typical Safety and regulatory approvals (28-lead SOIC_W_FP package) UL (pending): 5700 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A (pending) VDE certificate of conformity (pending) DIN V VDE V 0884-11 (VDE V 0884-11):2017-01 VIORM = 849 VPEAK (working voltage) Enable or disable refresh (low speed output correctness check) Operating temperature range: −40°C to +125°C 28-lead, wide-body, finer pitch SOIC_W_FP package with 8.3 mm creepage and clearance or 6 mm × 6 mm LFCSP package with 1.27 mm creepage and clearance

x2 Active Multiplier SMT, 27 - 31 GHz Fout Features: Very High Output Power: +20 dBm Low Input Power Drive: -2 to +6 dBm Very High Fo, 3Fo Isolation: >55 dBc @ Fout= 29 GHz 100 kHz SSB Phase Noise: -128 dBc/Hz Single Supply: +5V @ 213 mA 24 Lead 4×4mm QFN Package: 16mm2

Linear Voltage Regulator IC Positive Fixed 1 Output 150mA 8-MSOP

Digitally Programmable Sensor Signal Amplifier with EMI Filters Features: EMI filters at input pins Specified from −40°C to +140°C Low offset voltage: 10 μV maximum Low input offset voltage drift: 65 nV/°C maximum High CMRR: 94 dB minimum Digitally programmable gain and output offset voltage Programmable output clamp voltage Open and short wire fault detection Low-pass filtering Single-wire serial interface Stable with any capacitive load SOIC_N and LFCSP_VQ packages 4.5 V to 5.5 V operation

Ultrafast 7 ns Single Supply Comparator Features: 7 ns propagation delay at 5 V Single supply operation: 3 V to 10 V Low power Latch function TSSOP packages

Low Input Bias Current, Wide BW JFET Precision Dual Op Amp Features: Low Noise 6 nV/√Hz Low Offset Voltage: 100 µV Max Low Input Bias Current 10 pA Max Fast Settling: 600 ns to 0.01% Low Distortion Unity Gain Stable No Phase Reversal Dual-Supply Operation: ±5 V to ±13 V

3000 V/S, 35mW Current Feedback Quad Amplifier Features: High speed 250 MHz -3 dB bandwidth (G = +1) 3000 V/µs slew rate 21 ns settling time to 0.1% 1.8 ns rise time for 2 V step Low power 3.5 mA/amp power supply Current (35 mW/amp) Single supply operation Fully specified for +5 V supply High output current of 50 mA Good video specifications (RL = 150 Ω, G = +2) Gain flatness 0.1 dB to 30 MHz 0.04% differential gain error 0.10° differential phase error Low distortion –78 dBc THD at 5 MHz –61 dBc THD at 20 MHz Available in a 14-lead SOIC