2221

Adafruit

$92.50

As of October 12th, 2015 this product now ships with an Adafruit Trinket with a micro-USB plug.

One of the most popular Trinket projects now has its own kit pack!  Make your very own programmable NeoPixel goggles with 2 x 16 LED rings and an Adafruit Trinket. It even comes with a rechargeable LiPoly battery and charger. It's a great easy build and when you're done you'll have the coolest accessory.

Follow along with our popular Kaleidoscope Eyes tutorial.  The pack contains almost everything you need to put a pair of NeoPixel Rings in our costume goggles and power them with an Adafruit Trinket.  The LED rings fit perfectly inside 50mm round goggles and we include a 3.7v 150mAh battery and and Micro Lipo charger so you can run the battery and charge it all while contained in the goggles themselves.

These are fairly easy to put together and should take around an hour to make.  You'll need some basic soldering and hand tools to install the JST connector on the bottom side of the Trinket and connect your NeoPixel rings.  We don't include a soldering iron or solder but sell them in the Adafruit store and you can find epoxy or hot glue at most hardware/craft stores. The soldering is easy and is possible to do by beginners, its a 1-2 hour project (30 minutes if you are a kit-making expert!)

You'll also need a classic USB Micro B cable to program the Trinket, we don't include it as people tend to have too many USB cables in their desk drawer.

Please note! They look great, but we don't recommend putting the goggles over your eyes when they're all lit up since the lights can be bright and the goggle lenses can be hard to see out of. However, the goggles work great for costumes/accessories when they're put on top of your forehead!

Distributor SKU Stock MOQ 1 10 50 100 1,000 10,000
DigiKey 2221 0 $39.95 $39.95 $39.95 $39.95 $39.95 $39.95
Arrow North American Components 2221 97 1 $39.95 $39.95 $39.95 $39.95 $39.95 $39.95
Mouser Electronics 2221 $0.00
Newark 2221 26 500 $0.00 $0.00 $0.00 $0.00 $1.11 $1.11
Verical Marketplace 2221 97 1 $39.95 $39.95 $39.95 $39.95 $39.95 $39.95

3010

Adafruit

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather M0 WiFi w/ATWINC1500 - our take on an 'all-in-one' Arduino-compatible + high speed, reliable WiFi with built in USB and battery charging. Its an Adafruit Feather M0 with a WiFi module, ready to rock!

Connect your Feather to the Internet with this fine new FCC-certified WiFi module from Atmel. This 802.11bgn-capable WiFi module is the best new thing for networking your devices, with built-in low-power management capabilites, Soft-AP, SSL TSL 1.2 support and rock solid performance. We were running our adafruit.io MQTT demo for a full weekend straight with no hiccups (it would have run longer but we had to go to work, so we unplugged it). This module is very fast & easy to use in comparison to other WiFi modules we've used in the past.

This module works with 802.11b, g, or n networks & supports WEP, WPA and WPA2 encryption.  You can connect to your own WiFi networks or create your own with "Soft AP" mode, where it becomes its own access point (we have an example of it creating a webserver that you can then control the Arduino's pins). You can clock it as fast as 12MHz for speedy, reliable packet streaming. And scanning/connecting to networks is very fast, just a second or two.

You might be wondering why use this when you can get a HUZZAH Feather? Well, you get:

  • A highly-capable Cortex M0+ processor with ton more I/O pins, lots of 12-bit ADCs, a 10-bit DAC, 6 total SERCOMs that can each do SPI, I2C or UART (3 are used by the existing interfaces, leaving you 3), plenty of timers, PWMs, DMA, native USB, and more
  • The ATWINC has much lower power usage, about 12mA for the WINC & 10mA for the ATSAMD21 with auto-powermanagement on for the WiFi and no power management for the ARM. With manual power management, you can get the WiFi module to down to ~2mA by putting it to sleep.
  • This is compared to the ESP's ~70mA average current draw, and whose deep sleep mode requires a WDT reset.
  • We also found that we could stream more reliably (less 'bursty') with the ATWINC, although altogether the ESP has higher throughput.
  • You also dont have to 'yield' all the time to the WiFi core, since its a separate chip. You get full reign of the processor and timing

Of course, both WiFi-capable Feathers have their strengths and tradeoffs, & we love both equally!

At the Feather M0's heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic, the same one used in the new Arduino Zero. This chip has a whopping 256K of FLASH (8x more than the Atmega328 or 32u4) and 32K of RAM (16x as much)! This chip comes with built in USB so it has USB-to-Serial program & debug capability built in with no need for an FTDI-like chip. For advanced users who are comfortable with ASF, the SWDIO/SWCLK pins are available on the bottom, and when connected to a CMSIS-DAP debugger can be used to use Atmel Studio for debugging.

To make it easy to use for portable projects, we added a connector for any of our 3.7V Lithium polymer batteries and built in battery charging. You don't need to use a battery, it will run just fine straight from the micro USB connector. But, if you do have a battery, you can take it on the go, then plug in the USB to recharge. The Feather will automatically switch over to USB power when its available. We also tied the battery through a divider to an analog pin, so you can measure and monitor the battery voltage to detect when you need a recharge.

Here's some handy specs! Like all Feather M0's you get:

  • Measures 2.1" x 0.9" x 0.3" (53.65mm x 23mm x 8mm) without headers soldered in. Note it is 0.1" longer than most Feathers
  • Light as a (large?) feather - 6.1 grams
  • ATSAMD21G18 @ 48MHz with 3.3V logic/power
  • 256KB FLASH, 32KB SRAM, No EEPROM
  • 3.3V regulator (AP2112K-3.3) with 600mA peak current output, WiFi can draw 300mA peak during xmit
  • USB native support, comes with USB bootloader and serial port debugging
  • You also get tons of pins - 20 GPIO pins
  • Hardware Serial, hardware I2C, hardware SPI support
  • 8 x PWM pins
  • 10 x analog inputs
  • 1 x analog output
  • Built in 200mA lipoly charger with charging status indicator LED
  • Pin #13 red LED for general purpose blinking
  • Power/enable pin
  • 4 mounting holes
  • Reset button

Comes fully assembled and tested, with a USB bootloader that lets you quickly use it with the Arduino IDE. We also toss in some header so you can solder it in and plug into a solderless breadboard. Lipoly battery and MicroUSB cable not included (but we do have lots of options in the shop if you'd like!)

Distributor SKU Stock MOQ 1 10 50 100 1,000 10,000
DigiKey 3010 889 $0.64 $0.45 $0.40 $0.46 $0.27 $0.25
Arrow North American Components 3010 13 1 $40.68 $40.68 $40.68 $40.68 $40.68 $40.68
Mouser Electronics 3010 2259 1 $0.20 $0.17 $0.17 $0.14 $0.12 $0.10
Newark 3010 0 250 $6.42 $6.42 $6.42 $6.42 $5.91 $5.49
RS Components 3010 0 $31.98
Verical Marketplace 3010 13 1 $40.68 $40.68 $40.68 $40.68 $40.68 $40.68

2995

Adafruit

$11.22

ADAFRUIT FEATHER M0 BLUEFRUIT LE
Distributor SKU Stock MOQ 1 10 50 100 1,000 10,000
DigiKey 2995 1949 $0.20
Arrow North American Components 2995 1
Mouser Electronics 2995 0 $38.76
Newark 2995 0 $31.15
RS Components 2995 0 $27.41
TME 2995 3 $33.87
Verical Marketplace 2995 1

2796

Adafruit
ADAFRUIT FEATHER M0 ADALOGGER
Distributor SKU Stock MOQ 1 10 50 100 1,000 10,000
DigiKey 2796 0 $19.95 $19.95 $19.95 $19.95 $19.95 $19.95
Arrow North American Components 2796 0 1 $19.95 $19.95 $19.95 $19.95 $19.95 $19.95
Mouser Electronics 2796 0 1000 $0.47 $0.47
Newark 2796 0 1 $20.75 $20.75 $20.75 $20.75 $20.75 $20.75
RS Components 2796 0 $18.25
TME 2796 1 $26.24

3077

Adafruit

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores.

This is the Adafruit Feather 32u4 Radio (RFM69HCW) 433MHz - our take on an microcontroller packet radio transceiver with built in USB and battery charging. Its an Adafruit Feather 32u4 with a 433 MHz radio module cooked in! Great for making wireless networks that can go further than 2.4GHz 802.15.4 and similar, are more flexible than Bluetooth LE and without the high power requirements of WiFi.

This is the 433 MHz frequency module version.

At the Feather 32u4's heart is at ATmega32u4 clocked at 8 MHz and at 3.3V logic, a chip setup we've had tons of experience with as it's the same as the Flora. This chip has 32K of flash and 2K of RAM, with built in USB so not only does it have a USB-to-Serial program & debug capability built in with no need for an FTDI-like chip, it can also act like a mouse, keyboard, USB MIDI device, etc.

To make it easy to use for portable projects, we added a connector for any of our 3.7V Lithium polymer batteries and built in battery charging. You don't need a battery, it will run just fine straight from the micro USB connector. But, if you do have a battery, you can take it on the go, then plug in the USB to recharge. The Feather will automatically switch over to USB power when its available. We also tied the battery thru a divider to an analog pin, so you can measure and monitor the battery voltage to detect when you need a recharge.

Here's some handy specs! Like all Feather 32u4's you get:

  • Measures 2.0" x 0.9" x 0.28" (51mm x 23mm x 8mm) without headers soldered in
  • Light as a (large?) feather - 5.5 grams
  • ATmega32u4 @ 8MHz with 3.3V logic/power
  • 3.3V regulator with 500mA peak current output
  • USB native support, comes with USB bootloader and serial port debugging
  • You also get tons of pins - 20 GPIO pins
  • Hardware Serial, hardware I2C, hardware SPI support
  • 8 x PWM pins
  • 10 x analog inputs
  • Built in 100mA lipoly charger with charging status indicator LED
  • Pin #13 red LED for general purpose blinking
  • Power/enable pin
  • 4 mounting holes
  • Reset button

This Feather 32u4 Radio uses the extra space left over to add a RFM69HCW 433 MHz radio module:

  • SX1231 based module with SPI interface
  • Packet radio with ready-to-go library
  • Uses the amateur or license-free ISM band (ITU "Europe" license-free ISM or ITU "American" amateur with limitations)
  • +13 to +20 dBm up to 100 mW Power Output Capability (selectable in software)
  • Range of approx. 350 meters, depending on obstructions, frequency, antenna and power output
  • Create multipoint networks with individual node addresses
  • Encrypted packet engine with AES-128
  • Simple wire antenna or spot for uFL connector

Comes fully assembled and tested, with a USB bootloader that lets you quickly use it with the Arduino IDE. We also toss in some headers so you can solder it in and plug into a solderless breadboard. You will need to cut and solder on a small piece of wire (any solid or stranded core is fine) in order to create your antenna. Lipoly battery and USB cable not included but we do have lots of options in the shop if you'd like!

Distributor SKU Stock MOQ 1 10 50 100 1,000 10,000
DigiKey 3077 5 $512.16 $495.09 $386.53 $386.53 $386.53 $386.53
Arrow North American Components 3077 30 1 $24.95 $24.95 $24.95 $24.95 $24.95 $24.95
Mouser Electronics 3077 $0.00
Newark 3077 0 1 $1,067.27 $1,067.27 $1,012.07 $901.66 $699.25 $699.25
Verical Marketplace 3077 30 1 $24.95 $24.95 $24.95 $24.95 $24.95 $24.95

1469

Adafruit
BREAKOUT BOARD WI-FI MODULE ANT; Silicon Manufacturer:Texas Instruments; Core Architecture:-; Core Sub-Architecture:-; Silicon Core Number:CC3000; Silicon Family Name:-; For Use With:Any MCU board with SPI Interface ;RoHS Compliant: Yes
Distributor SKU Stock MOQ 1 10 50 100 1,000 10,000
DigiKey 1528-1320-ND 0 $0.00 $0.00 $0.00 $0.00 $0.00 $0.00
Arrow North American Components 1469 0 1 $34.95 $34.95 $34.95 $34.95 $34.95 $34.95
element14 APAC 1469 1 1 * $66.19 * $66.19 * $66.19 * $66.19 * $66.19 * $66.19
Farnell 1469 1 1 * $64.59 * $57.64 * $57.64 * $57.64 * $57.64 * $57.64
Mouser Electronics 485-1469 0 1 $0.00
Newark 1469 4 24 $0.00 $8.42 $7.43 $7.43 $7.43 $7.43

1713

Adafruit

$76.20

Audio IC Development Tools MAX9814 Electret Mic Amp Breakout
Distributor SKU Stock MOQ 1 10 50 100 1,000 10,000
DigiKey 36-1713-ND 0 $136.28 $136.28 $136.28 $136.28 $136.28 $136.28
Mouser Electronics 534-1713 1 1 $257.24 $257.24 $231.66 $231.66 $231.66 $231.66

1788

Adafruit
Adafruit Music Maker MP3 Shield for Arduino w/3W Stereo Amp - v1.0
Distributor SKU Stock MOQ 1 10 50 100 1,000 10,000
DigiKey 1788 9 $34.95 $34.95 $34.95 $34.95 $34.95 $34.95
Arrow North American Components 1788 20 1 $34.95 $56.85 $54.84 $54.84 $54.84 $54.84
Mouser Electronics 1788 13 1 $34.78 $34.78 $34.78 $34.78 $34.78 $34.78
Newark 1788 2 1 $0.00 $0.00 $0.00 $0.00 $0.00 $0.00
Verical Marketplace 1788 20 1 $34.95 $34.95 $34.95 $34.95 $34.95 $34.95

1622

Adafruit
White LED Backlight Module - Medium 23mm x 75mm
Distributor SKU Stock MOQ 1 10 50 100 1,000 10,000
DigiKey 1622 236 1 $2.50 $2.50 $2.50 $2.50 $2.50 $2.50
Arrow North American Components 1622 173 1 $2.50 $2.50 $2.50 $2.50 $2.50 $2.50
Jameco 1622 63 $3.49 $2.75 $2.75 $2.59 $2.59 $2.59
Mouser Electronics 1622 603 1 $2.49 $2.49 $2.49 $2.49 $2.49 $2.49
Newark 1622 3 1 $60.90 $60.90 $60.90 $60.90 $60.90 $60.90
Verical Marketplace 1622 173 4 $2.50 $2.50 $2.50 $2.50 $2.50

1626

Adafruit
White LED Backlight Module - Small 12mm x 40mm
Distributor SKU Stock MOQ 1 10 50 100 1,000 10,000
DigiKey 1626 0 $1.95 $1.95 $1.95 $1.95 $1.95 $1.95
Arrow North American Components 1626 0 1 $2.05 $2.05 $2.05 $2.05 $2.05 $2.05
Jameco 1626 11 $3.25 $2.95 $2.95 $2.95 $2.95 $2.95
Mouser Electronics 1626 450 1 $1.94 $1.94 $1.94 $1.94 $1.94 $1.94
Newark 1626 5 1 $2.07 $2.07 $2.07 $2.07 $2.07 $2.07
Verical Marketplace 1626 192 3 $2.15 $2.15 $2.15 $2.15 $2.15 $2.15