60V Low IQ, Dual, 2-Phase Synchronous Step-Down DC/DC Controller Features: Wide VIN Range: 4.5V to 60V (65V Abs Max) Wide Output Voltage Range: 0.8V ≤ VOUT ≤ 99% • VIN Adjustable Gate Drive Level 5V to 10V (OPTI-DRIVE) No External Bootstrap Diodes Required Low Operating IQ: 29μA (One Channel On) Selectable Gate Drive UVLO Thresholds Out-of-Phase Operation Reduces Required Input Capacitance and Power Supply Induced Noise Phase-Lockable Frequency: 75kHz to 850kHz Selectable Continuous, Pulse Skipping or Low Ripple Burst Mode® Operation at Light Loads Selectable Current Limit (LTC3892/LTC3892-2) Very Low Dropout Operation: 99% Duty Cycle Power Good Output Voltage Monitors (LTC3892/LTC3892-2) Low Shutdown IQ: 3.6μA Small 32-Lead 5mm × 5mm QFN Package (LTC3892/LTC3892-2) or TSSOP Package (LTC3892-1)

18-Bit, 15Msps SAR ADC Features:15Msps Throughput RateNo Pipeline Delay, No Cycle Latency95.7dB SNR (Typ) at fIN = 1MHz102dB SFDR (Typ) at fIN = 1MHzNyquist Sampling Up to 7.5MHz InputGuaranteed 18-Bit, No Missing Codes±3LSB INL (Max)8.192VP-P Differential Inputs5V and 2.5V SuppliesInternal 20ppm/°C (Max) ReferenceSerial LVDS Interface125mW Power Dissipation32-Pin (5mm × 5mm) QFN Package

Precision, Low Power Differential Amplifier/ADC Driver Family Features: Available with User Settable Gain or Fixed-Gain of 0.5V/V, 1V/V, or 2V/V 2.9nV/√Hz Input-Referred Noise 2mA Maximum Supply Current 45ppm Max Gain Error 0.5ppm/°C Max Gain Error Drift 94dB Min CMRR 100µV Max Offset Voltage 50nA Max Input Offset Current Fast Settling: 720ns to 18-Bit, 8VP-P Output 2.8V (±1.4V) to 11V (±5.5V) Supply Voltage Range Differential Rail-to-Rail Outputs Input Common Mode Range Includes Ground Low Distortion: 118dB SFDR at 2kHz, 18VP-P 500MHz Gain-Bandwidth Product 35MHz –3dB Bandwidth Low Power Shutdown: 20µA (VS = 3V) 8-Lead MSOP, 2mm × 3mm 8-Lead DFN and 3mm × 3mm 16-lead LFCSP Packages

25A, Dual PolyPhase Regulator with Digital Power System Management Features: PMBus/I2C Compliant Serial Interface Telemetry Read-Back Includes VIN, IIN, VOUT, IOUT, Temperature and Faults Programmable Voltage, Current Limit, Digital Soft-Start/Stop, Sequencing, Margining, OV/UV/OC Sub-Milliohm DCR Current Sensing Digitally Adjustable Loop Compensation Parameters 0.5% Output Voltage Accuracy Over Temperature Integrated Input Current Sense Amplifier Internal EEPROM with ECC and Fault Logging Integrated N-Channel MOSFET Gate Drivers

60V Low IQ, Dual, 2-Phase Synchronous Step-Down DC/DC Controller Features: Wide VIN Range: 4.5V to 60V (65V Abs Max) Wide Output Voltage Range: 0.8V ≤ VOUT ≤ 99% • VIN Adjustable Gate Drive Level 5V to 10V (OPTI-DRIVE) No External Bootstrap Diodes Required Low Operating IQ: 29μA (One Channel On) Selectable Gate Drive UVLO Thresholds Out-of-Phase Operation Reduces Required Input Capacitance and Power Supply Induced Noise Phase-Lockable Frequency: 75kHz to 850kHz Selectable Continuous, Pulse Skipping or Low Ripple Burst Mode® Operation at Light Loads Selectable Current Limit (LTC3892/LTC3892-2) Very Low Dropout Operation: 99% Duty Cycle Power Good Output Voltage Monitors (LTC3892/LTC3892-2) Low Shutdown IQ: 3.6μA Small 32-Lead 5mm × 5mm QFN Package (LTC3892/LTC3892-2) or TSSOP Package (LTC3892-1)

Current, Voltage, and Charge Monitor forHigh Voltage Battery Packs Features: Measures Battery Stack Voltage, Current and Power Indicates Accumulated Battery Charge and Energy 20-Bit Current Measurement with <1μV Offset Built-In Isolated isoSPI™ or SPI Interface LTC68xx/ADBMS68xx Compatible, Supports Synchronous Measurements with Cell Monitors Up to 12 Buffered Voltage Measurement Inputs Up to 5 GPIOs, Configurable to Drive Ground, Supply or Toggling at 400kHz High or Low Side Current Sense 0.3% Current and Voltage Accuracy 1% Energy and Charge Accuracy True Average ADCs I2C EEPROM Interface to Store Board Calibration Factors Threshold Registers for all Measured Quantities Engineered for ISO26262 Compliant Systems Open Wire Detection on Input Pins Available in 48-Lead LQFP Package AEC-Q100 Qualified for Automotive Applications

60V, 1.5A LED Driver with Internal Exponential Scale Dimming Features: Operates in Boost, SEPIC, Buck Mode and Buck-Boost Mode 128:1 Internal Exponential Scale PWM Dimming Wide Input Voltage Range (3V to 60V) 1.5A, 60V Internal Switch 20000:1 External PWM Dimming at 100Hz ±2% LED Current and Output Voltage Regulation PMOS Switch Driver for PWM Dimming LED Short/Open Protection and Indication Constant Voltage and Constant Current Regulation Adjustable 300kHz to 2MHz Switching Frequency Adjustable 100Hz to 1kHz PWM Generator Frequency Internal Spread Spectrum Frequency Modulation Easy Synchronization to External Clock Programmable VIN UVLO with Hysteresis Available in 16-Lead MSOP Package

Low IQ Boost/SEPIC/Inverting Converter with 1.5A, 150V Switch Features: Wide Input Voltage Range: 2.8V to 60V Ultralow Quiescent Current and Low Ripple Burst Mode® Operation: IQ = 9µA 1.5A, 150V Power Switch Positive or Negative Output Voltage Programming with a Single Feedback Pin Programmable Frequency (100kHz to 500kHz) Synchronizable to an External Clock Spread Spectrum Frequency Modulation for Low EMI BIAS Pin for Higher Efficiency Programmable Undervoltage Lockout (UVLO) Thermally Enhanced 16-lead MSOP Package AEC-Q100 Qualified for Automotive Applications

5 kV RMS/3.75 kV RMS, Dual LVDS Gigabit Isolator (Second Channel Reversed) Features: 5 kV rms and 3.75 kV rms LVDS isolators Complies with TIA/EIA-644-A LVDS standard Multiple dual-channel configurations Any data rate up to 1.1 Gbps switching with low jitter 4 ns typical propagation delay 2.6 ps rms typical random jitter, rms 90 ps typical peak-to-peak total jitter at 1.1 Gbps 2.5 V or 3.3 V supplies −75 dBc power supply ripple rejection, phase spur level Glitch immunity ±8 kV IEC 61000-4-2 ESD protection across isolation barrier High common-mode transient immunity: >25 kV/μs Passes EN 55022 Class B radiated emissions limits with 1.1 Gbps PRBS Safety and regulatory approvals (20-lead SOIC_W package) UL (pending): 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A (pending) VDE certificate of conformity (pending) DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 VIORM = 424 VPEAK Fail-safe output high for open, short, and terminated input conditions (ADN4655/ADN4656) Operating temperature range: −40°C to +125°C 7.8 mm minimum creepage and clearance

0.5C Accurate, 16-Bit Digital SPI Temperature Sensor Features: Easy implementation No temperature calibration/correction required by user No linearity correction required Low power Power saving 1 sample per second (SPS) mode 700 µW typical at 3.3 V in normal mode 7 µW typical at 3.3 V in shutdown mode High performance Temperature accuracy ±0.5°C from −40°C to +105°C (2.7 V to 3.6 V) ±0.4°C from −40°C to +105°C (3.0 V) 16-bit temperature resolution: 0.0078°C Fast first temperature conversion on power-up of 6 ms See datasheet for additional features